Quarter Mile Time
Thread Starter
New Member
Joined: 06-01-2006
Posts: 16
From: florida
Quarter Mile Time
No worries, I searched for this topic before I posted but....the only talk of quarter mile time I have seen was for the 2.2L motor. Has anyone taken their 2.4 to the track? 1/4 time? 0-60 time? Thanks
Joined: 09-23-2006
Posts: 3
From: APOPKA,Florida
I have a daytona Blue Metallic 2LT. Loaded everything except the spoiler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
Senior Member
Joined: 01-13-2006
Posts: 1,059
From: Tucson, AZ
If you check around SoCalMike has a dash mount meter that registered his at a 15.86... That should give you a good starting number for a slightly modifed 2.4 (CGS intake, IMCO) with an auto trans at sea level. Good hunting!
Thread Starter
New Member
Joined: 06-01-2006
Posts: 16
From: florida
Originally Posted by FoSHHR
I have a daytona Blue Metallic 2LT. Loaded everything except the spoiler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
At Speed World (Bithlo FL) my 1/4 was 17.139.
Not what I was expecting but an ok start.
My mods are 7 color under glows and the Imco muffler.
Do you have the 2.2 or 2.4 ?
Last edited by Ghost Ridin; Nov 16, 2006 at 01:45 AM.
Platinum Member
Joined: 05-09-2006
Posts: 6,805
From: "Upland" Mesa, Arizona
Originally Posted by Ghost Ridin
Do you have the 2.2 or 2.4 cyl?
