JL Audio System Going in- Thank you Jaydogg
04-27-2006, 11:14 AM
#11
Senior Member
Join Date: 02-23-2006
Location: Oklahoma
Posts: 629
Originally Posted by cj krause
i have to see how much room is there too. the amps might fit too under the back seat..
will see
will see
04-27-2006, 11:41 AM
#12
Senior Member
Join Date: 02-03-2006
Location: So Cal
Posts: 1,785
Originally Posted by Navyflyer11
There is alot of room under the rear seat. just not any room to get to anything with out pulling the 3 bolts on the front. (I was trying to put a dvd player under there but couldn't change discs.) IMOP it would be a good place for amps.
Ng
04-27-2006, 11:46 AM
#13
Senior Member
Join Date: 02-23-2006
Location: Oklahoma
Posts: 629
I truly think so. The gap in the cargo area will provide ventalation. I was running two Orion HCCA's in a trunk of a mazda many years back with a lot less ventalation and problems were minimal. 
04-27-2006, 11:49 AM
#14
Senior Member
Join Date: 02-03-2006
Location: So Cal
Posts: 1,785
Originally Posted by Navyflyer11
I truly think so. The gap in the cargo area will provide ventalation. I was running two Orion HCCA's in a trunk of a mazda many years back with a lot less ventalation and problems were minimal.
04-27-2006, 11:51 AM
#15
Senior Member
Join Date: 02-23-2006
Location: Oklahoma
Posts: 629
If you take the 3 bolts in the front off the seat folds up for easy access. 
04-27-2006, 03:07 PM
#16
Senior Member
Join Date: 12-18-2005
Location: Middle Village, NY
Posts: 1,791
I just had mine out yesterday. There are 2 small cubbys under the seats, but there will not be ANY ventition-and amps need air. Even a fan would not help, since I do not believe there will be any source of air to blow from. It would be fine for cross overs, distribution blocks, etc.
04-27-2006, 09:46 PM
#17
Deceased
Thread Starter
Join Date: 10-03-2005
Location: Sachse, TX NE Dallas
Posts: 2,351
Originally Posted by Navyflyer11
If you take the 3 bolts in the front off the seat folds up for easy access.
there are 4 in front
so you took out the back 3 and leaned the seat forward?
04-27-2006, 10:03 PM
#18
Senior Member
Join Date: 01-27-2006
Location: cincinnati, oh
Posts: 520
cj first off your are welcome. 2nd off glad you got everything. you will be a very happy man trust me. did you get a different head unit or are you using the stock one? as for the pioneer versus alpine in head units, this one is a very hard one for me. i like pioneers but the alpine just had so much more, and i really liked that i could control my amps from the hu, and that pretty much sold me on it. i had some pioneers that when subs where hooked up i couldnt control them and had problems tuning me system and got way to much bass because of it. if i had to do it over again kenwood kdc-889 or alpine 9855 would be the only choice. i will eventually most likely getting ride of the 9855 i got to got to a double din kenwood dvd player unless i find an alpine that does what i want. Back on topic cj have fun installing and make sure you get that second battery like i have in that diagram, 3 amps might be a little much for the stock hhr battery, better save than sorry.
04-27-2006, 10:19 PM
#19
Senior Member
Join Date: 12-18-2005
Location: Middle Village, NY
Posts: 1,791
Yep There are 2 bolts for the 60% part and 1 for the small section, then the seat pivots. And they have these strange rectangular washers attached that must be in the right position to secure the plastic cover.
04-27-2006, 10:22 PM
#20
Senior Member
Join Date: 02-03-2006
Location: So Cal
Posts: 1,785
Originally Posted by jaydogg
... i like pioneers but the alpine just had so much more, and i really liked that i could control my amps from the hu, and that pretty much sold me on it. i had some pioneers that when subs where hooked up i couldnt control them and had problems tuning me system and got way to much bass because of it...alpine 9855 would be the only choice.
Chaulk one up for Alpine baby! 
Ng