Brakes | Suspension | Shocks | Struts Brakes,Springs, Shocks,Front End Components & Steering

ESC Light after Changing Brake pads and Rotor

Old Apr 19, 2016 | 03:52 PM
  #1  
Zachles's Avatar
Thread Starter
New Member
 
Joined: 04-11-2016
Posts: 10
From: Homestead Florida
ESC Light after Changing Brake pads and Rotor

Changed my front brake pads and my front passenger side rotor and ever since, my ESC warning light has been on. The ABS warning light has been coming on and off as well.

What are the possible causes for this?
Old Apr 19, 2016 | 03:56 PM
  #2  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
You damaged the wire or connector for the ABS.
Old Apr 19, 2016 | 04:00 PM
  #3  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
This wire in red circle.
Attached Images  
Old Apr 19, 2016 | 05:54 PM
  #4  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,083
From: Welland,Ont Canada
Double check that wire connection
Old Apr 19, 2016 | 06:30 PM
  #5  
Zachles's Avatar
Thread Starter
New Member
 
Joined: 04-11-2016
Posts: 10
From: Homestead Florida
Originally Posted by donbrew
This wire in red circle.
Where is that located exactly?
Old Apr 19, 2016 | 06:48 PM
  #6  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
The picture shows it on the back side of the hub, the connector is on the strut.

See Post #3
Attached Images  
Old Apr 19, 2016 | 06:54 PM
  #7  
firemangeorge's Avatar
Platinum Member
 
Joined: 12-06-2009
Posts: 11,721
From: Alabama
X2 on the advice above.

Fwiw. Rotors really should be replaced in pairs.
Old Apr 19, 2016 | 07:19 PM
  #8  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,083
From: Welland,Ont Canada
If only they were sold in sets, you know , 2 rotors, all four brake pads, hardware.
Who am I kidding , most shops charge for it but don't install them.
Old Apr 20, 2016 | 11:13 AM
  #9  
Zachles's Avatar
Thread Starter
New Member
 
Joined: 04-11-2016
Posts: 10
From: Homestead Florida
Originally Posted by donbrew
The picture shows it on the back side of the hub, the connector is on the strut.

See Post #3
OK, I will check it out tonight. Thanks. I'll update what I find.
Old Apr 23, 2016 | 06:46 AM
  #10  
Zachles's Avatar
Thread Starter
New Member
 
Joined: 04-11-2016
Posts: 10
From: Homestead Florida
Light turned off on the DIC, problem is fixed. Thanks guys. :)

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:03 AM.