General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

07 ss?

Old Apr 16, 2010 | 05:27 PM
  #1  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
07 ss?

Well a 08 SS Grill fit on my 07? Hopefully this is not in the wrong section, please help! ahhhh!
Old Apr 16, 2010 | 05:31 PM
  #2  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Hit Search as there are several threads on this. You need to notch the bumper on the 07.
Old Apr 16, 2010 | 05:31 PM
  #3  
Greybeard999's Avatar
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
From what I've read, no, not without cutting.
Old Apr 17, 2010 | 07:03 AM
  #4  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
::Sigh:: well, it was worth the try!
Old Apr 17, 2010 | 07:21 AM
  #5  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Originally Posted by FROSTHHR07
::Sigh:: well, it was worth the try!
Not every thing is a bolt on if you want to fix up a car.

It is not that hard, check out the threads. The results are worth the efforts.
Old Apr 17, 2010 | 07:24 AM
  #6  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
Originally Posted by hyperv6
Not every thing is a bolt on if you want to fix up a car.

It is not that hard, check out the threads. The results are worth the efforts.
Well see I work @ a car audio shop, we do a lot of fiber glass work...and I really want to stay as close to OEM as possible, so notching the bumper to fit a grill, just doesn't seem worth it too me...when I could just a stock grill, and fab up some sort of crazy fiberglass design. I have one drawn out, and it will definitely be a 1 of 1. Lets see how that goes. I was just looking for an alternative route to be a little easier on my pockets.
Old Apr 17, 2010 | 07:30 AM
  #7  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Originally Posted by FROSTHHR07
Well see I work @ a car audio shop, we do a lot of fiber glass work...and I really want to stay as close to OEM as possible, so notching the bumper to fit a grill, just doesn't seem worth it too me...when I could just a stock grill, and fab up some sort of crazy fiberglass design. I have one drawn out, and it will definitely be a 1 of 1. Lets see how that goes. I was just looking for an alternative route to be a little easier on my pockets.
Notching is the easiest and cheapest. But it is all in what you want.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:12 AM.