General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

07 ss?

Thread Tools
 
Search this Thread
 
Old Apr 16, 2010 | 05:27 PM
  #1  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
07 ss?

Well a 08 SS Grill fit on my 07? Hopefully this is not in the wrong section, please help! ahhhh!
Old Apr 16, 2010 | 05:31 PM
  #2  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Hit Search as there are several threads on this. You need to notch the bumper on the 07.
Old Apr 16, 2010 | 05:31 PM
  #3  
Greybeard999's Avatar
Senior Member
 
Joined: 03-06-2010
Posts: 6,869
From: Ohio
From what I've read, no, not without cutting.
Old Apr 17, 2010 | 07:03 AM
  #4  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
::Sigh:: well, it was worth the try!
Old Apr 17, 2010 | 07:21 AM
  #5  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Originally Posted by FROSTHHR07
::Sigh:: well, it was worth the try!
Not every thing is a bolt on if you want to fix up a car.

It is not that hard, check out the threads. The results are worth the efforts.
Old Apr 17, 2010 | 07:24 AM
  #6  
FROSTHHR07's Avatar
Thread Starter
Member
 
Joined: 04-04-2010
Posts: 45
From: Flint, Michigan
Originally Posted by hyperv6
Not every thing is a bolt on if you want to fix up a car.

It is not that hard, check out the threads. The results are worth the efforts.
Well see I work @ a car audio shop, we do a lot of fiber glass work...and I really want to stay as close to OEM as possible, so notching the bumper to fit a grill, just doesn't seem worth it too me...when I could just a stock grill, and fab up some sort of crazy fiberglass design. I have one drawn out, and it will definitely be a 1 of 1. Lets see how that goes. I was just looking for an alternative route to be a little easier on my pockets.
Old Apr 17, 2010 | 07:30 AM
  #7  
hyperv6's Avatar
Senior Member
 
Joined: 07-05-2008
Posts: 5,464
From: Akron Ohio
Originally Posted by FROSTHHR07
Well see I work @ a car audio shop, we do a lot of fiber glass work...and I really want to stay as close to OEM as possible, so notching the bumper to fit a grill, just doesn't seem worth it too me...when I could just a stock grill, and fab up some sort of crazy fiberglass design. I have one drawn out, and it will definitely be a 1 of 1. Lets see how that goes. I was just looking for an alternative route to be a little easier on my pockets.
Notching is the easiest and cheapest. But it is all in what you want.




All times are GMT -5. The time now is 03:27 PM.