2008 chevrolet hhr panel cross box tool box
2008 chevrolet hhr panel cross box tool box
I will apologize in advance is this post in inappropriate, but I just spotted this item on ebay.
It's a "2008 chevrolet hhr panel cross box tool box" and I've read posts where some of you that have non-panel rarely use the seats and this might be a good find. My experience is that you don't see these for sale very often.
To find it use the title as your search criteria.
It's a "2008 chevrolet hhr panel cross box tool box" and I've read posts where some of you that have non-panel rarely use the seats and this might be a good find. My experience is that you don't see these for sale very often.
To find it use the title as your search criteria.
For a step-by step w/pics, here's a Very good thread about 'adding a back seat in a panel'.
https://www.chevyhhr.net/forums/how-tutorial-library-21/install-rear-seat-panel-26817/ You just do the oppposite..
And FWIW: The tool bins under the lids are not as deep as one may think... Seems Chevy thought 5" to 6 " deep was enough.. I imagine Chevy didn't want too much weight stowed away..
I am considering modifying my bins to be considerably deeper..
Here's the link to the ebay box: http://cgi.ebay.com/ebaymotors/ws/eB...SS:MOTORS:1123
& You sure don't often see them on eBay, as OP mentioned.
Last edited by sleeper; Jan 18, 2010 at 01:10 AM.
I agree with sleeper, the bins are too shallow to store anything large and you have to line them with a towel or you hear everything rattling around. I took mine out after about three months and replaced with a rear seat and storage compartment.
Won't be difficult to do.. Once opened I'll know how much deeper, etc..
From what I've seen, I don't think 12" deep (min) is out of the question..
And actually there is a LOT of dead space under them..So actually they could even be bigger than the hatch doors..
Then line them with carpeting, or thick rubber.
sleeper
Thread
Thread Starter
Forum
Replies
Last Post
finatics
Appearance/Modifications Discussions
8
May 15, 2008 06:44 PM



