I completed 2 mods on my HHR today. Built and installed a upper shelf in the cargo area. Covered it in black and white vinyl. Also made the lower grill from the rain gutter covers that i got from Lowes. I have pix but don't know or can't figure out how to post pix. I can sent someone pix of the shelf and grill if anyone is interested. Also installed the in channel rain guards. I like them. No wind noise now.

 

Let me be the first to say....

 

You're a quick learner El Guappo.

There is a great post by fallensaint on how to post pictures HERE. If you need any help, just let us know and we'll be happy to help if you have any problems. Look forward to seeing what you have done.

 

I'm curious about the self.

 

I just put pix of the shelf and grill in the gallery under kermitkuhn

 

here's the shelf.....


Great idea! Didn't think to make one, we just bought an extra one.

 

What material did you use for the shelf itself?

Just wondering what kind of load it would hold without bending too much.

 

Sounds good I would like to see the shelf, I have the same problem I also am having a problem posting Photos, This is all new to me. but I will get it, I put on the Vent visors on mine w/ Sun-roof also. The HHR looks longer. The Vent Visors that I put on on the Door and not the same as the In Channel ones.
Good luck with your vehicle.
Z

 

Yeshua
I like the shelf you made , It looks like something that you would have to purchase, Dose it move or when you are driving. I have been thinking of doing somethink like this. I like your.

Z
By the way check your e-mail

 

I made the shelf out of 3/4 plywood. The round knobs are made from 1 1/4 inch dowel rod that i had and they are cut to 1 inch length. I used 2 inch screws through the rod pieces. I drilled a hole through the center first so it wouldn't split. It will just hold small things. When you push down on it it seems sturdy. I glued the vinyl with 3M adhesive. The shelf will also fit in the bottom in place of the plastic one. That one can then be put in the top position. I cut the pattern from the bottom piece.