General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

Need oil cooler for 2.4L

Old May 24, 2024 | 03:42 PM
  #1  
Redfred's Avatar
Thread Starter
 
Joined: 05-24-2024
Posts: 3
From: FL
Need oil cooler for 2.4L

Can anyone direct me to were I can purchase a New oil cooler for a 2006 2.4 ?
Old May 24, 2024 | 03:52 PM
  #2  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,989
From: Welland,Ont Canada
EBay for a used one.

Last edited by Oldblue; May 25, 2024 at 05:05 AM.
Old May 24, 2024 | 07:59 PM
  #3  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,509
From: California
The LNF 2.0 turbocharged part number, both Autozone and O'Reilly say it does not fit the 2006 2.4.

Last edited by RJ_RS_SS_350; May 26, 2024 at 11:10 AM.
Old May 24, 2024 | 08:08 PM
  #4  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,485
From: Fredericksburg,VA
How could it get damaged? I can't imagine it getting damaged short of using a hammer.
If it is leaking oil the O-rings can be replaced.
It is not a vital part; you could block it off. A junkyard should have a 2006 2.4.
Old May 24, 2024 | 09:21 PM
  #5  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,509
From: California
12594525 is the (discontinued) Part Number for the 2.4.

Old May 25, 2024 | 05:19 AM
  #6  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,989
From: Welland,Ont Canada
I searched all my sources, no new ones available, they are common to the same year Saturn, Cobalt, G5
contact your local pick a part
Old May 26, 2024 | 09:56 AM
  #7  
PulpFriction's Avatar
Senior Member
 
Joined: 12-05-2014
Posts: 3,352
From: Northern Ohio
You probably don't really need an oil cooler for that car.
Old May 26, 2024 | 10:04 AM
  #8  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,989
From: Welland,Ont Canada
Well if it’s rusted out and leak oil or coolant, yes you have to replace it. Somebody on here used an adapter plate and external oil cooler. There are companies that use the Ecotec with oil cooler, but they don’t seem to be online any more.

it might just be the oil seals need replacing.
Old May 26, 2024 | 10:12 AM
  #9  
Redfred's Avatar
Thread Starter
 
Joined: 05-24-2024
Posts: 3
From: FL
Originally Posted by Oldblue
Well if it’s rusted out and leak oil or coolant, yes you have to replace it. Somebody on here used an adapter plate and external oil cooler. There are companies that use the Ecotec with oil cooler, but they don’t seem to be online any more.

it might just be the oil seals need replacing.
… I replaced the seals and still leaking. Removed again and pressure tested and has a split.. thanks anyway. Fred Maio.
Old May 26, 2024 | 10:14 AM
  #10  
Redfred's Avatar
Thread Starter
 
Joined: 05-24-2024
Posts: 3
From: FL
It split .. no LKQ will sell separate from engine

Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:35 PM.