Voltage to switch backlight
Thread Starter
New Member
Joined: 03-04-2010
Posts: 16
From: Melvin MI
Voltage to switch backlight
Has anyone checked the actual voltage being supplied to the led back lighting?
I want to add some LED lighting to the window switches on my 2007 HHR.
Playing around with it, I think there is enough space around the switches to make an outline type of lighting. I would like to tap into the existing lighting control circuit so they only come on when the others do.
Also, I noticed that my switches for the mirrors and drivers door lock are not lighting up. Are they suppose to? I am looking at the wiring diagram and can only see one common point (S311) in center console?
Any help would be appreciated.
Bob
I want to add some LED lighting to the window switches on my 2007 HHR.
Playing around with it, I think there is enough space around the switches to make an outline type of lighting. I would like to tap into the existing lighting control circuit so they only come on when the others do.
Also, I noticed that my switches for the mirrors and drivers door lock are not lighting up. Are they suppose to? I am looking at the wiring diagram and can only see one common point (S311) in center console?
Any help would be appreciated.
Bob
Senior Member
Joined: 09-14-2007
Posts: 1,441
From: xxxxx-xx
look at this thread (from back in 2006) for an idea https://www.chevyhhr.net/forums/how-tutorial-library-21/backlit-window-buttons-1878/
Yes, your door lock and mirror buttons should light up.
Yes, your door lock and mirror buttons should light up.
Thread
Thread Starter
Forum
Replies
Last Post
