What Did You Do To Your HHR Today?
08-03-2018, 08:48 PM
Moderator
Join Date: 05-01-2014
Location: California
Posts: 7,819
08-03-2018, 08:51 PM
Administrator
Join Date: 10-13-2011
Location: Welland,Ont Canada
Posts: 36,591
Ron.. new part number...
https://www.rockauto.com/en/parts/ac...actuator,12910
https://www.google.ca/search?q=12655...&client=safari
here on the part fitment page it’s listed the replace part number
https://www.1aauto.com/variable-valv...0/i/gmzmx00010
https://www.rockauto.com/en/parts/ac...actuator,12910
https://www.google.ca/search?q=12655...&client=safari
here on the part fitment page it’s listed the replace part number
https://www.1aauto.com/variable-valv...0/i/gmzmx00010
Last edited by Oldblue; 08-04-2018 at 07:56 AM.
08-03-2018, 09:09 PM
Platinum Member
Join Date: 01-09-2007
Location: SE USA
Posts: 15,882
Weirds A/C thing.
Driving my HHR, had A/C on & it got cold, so I figured I'd just shut it off for a while. That was fine, after the sun came out again, I turned the A/C back on & frosty air started coming out my A/C ducts, like the freezer in the fridge at home.
Just for like 30 seconds, smelled cold & good, but never had that happen ever before.
Just for like 30 seconds, smelled cold & good, but never had that happen ever before.
08-04-2018, 12:20 PM
Moderator
Join Date: 05-01-2014
Location: California
Posts: 7,819
Ron.. new part number...
https://www.rockauto.com/en/parts/ac...actuator,12910
https://www.google.ca/search?q=12655...&client=safari
here on the part fitment page it’s listed the replace part number
https://www.1aauto.com/variable-valv...0/i/gmzmx00010
https://www.rockauto.com/en/parts/ac...actuator,12910
https://www.google.ca/search?q=12655...&client=safari
here on the part fitment page it’s listed the replace part number
https://www.1aauto.com/variable-valv...0/i/gmzmx00010
08-04-2018, 01:03 PM
Administrator
Join Date: 10-13-2011
Location: Welland,Ont Canada
Posts: 36,591
Thanks RJ,
today , I polished the headlights with a professional 3M kit , Dan had purchased this to do a sideline business, but he never opened the kit, so I got busy, took about a half hour per side, they’ll do for winter , then I’ll replace them with a set of Fall Edition or maybe Depo headlights
today , I polished the headlights with a professional 3M kit , Dan had purchased this to do a sideline business, but he never opened the kit, so I got busy, took about a half hour per side, they’ll do for winter , then I’ll replace them with a set of Fall Edition or maybe Depo headlights
08-04-2018, 09:54 PM
Premium Member
Join Date: 09-23-2009
Location: Hurst Texas
Posts: 467
08-04-2018, 10:09 PM
Member
Join Date: 07-04-2018
Location: South East Michigan
Posts: 52
Going down the list
Did the front brakes and rotors, put some full synthetic Valvoline high mileage dexos 5w30 in her, checked out the flex pipe( looks good) but did find a small leak in the seal on outside of trans ( CV joint?). I am going to pull the rears off tomorrow and check things out.