General HHR Discuss anything related to the Chevy HHR that doesnt seem to fit into the more specific categories below.

What Did You Do To Your HHR Today?

Thread Tools
 
Search this Thread
 
Old Feb 21, 2022 | 07:13 PM
  #20721  
Ronnie's Avatar
Senior Member
 
Joined: 02-23-2020
Posts: 518
From: Kansas
fixing/replacing bulbs is something we can do and try to keep ourselves busy instead of worrying about things beyond our control.

Last edited by Oldblue; Feb 22, 2022 at 07:02 AM. Reason: Removed political content, per site rules
Old Feb 21, 2022 | 10:51 PM
  #20722  
geg's Avatar
geg
Senior Member
 
Joined: 03-22-2010
Posts: 2,108
From: Russia Ekaterinburg
Playing with LED bulbs is tempting, but expensive. Nevertheless, I began to slowly dive into the problem. I look bulbs at Aliexpress - now it's closer to me than Rockauto. But so far I have not seen something that inspires at least a fleeting confidence.


Last edited by Oldblue; Feb 22, 2022 at 07:04 AM. Reason: Removed political content, per site rules.
Old Feb 22, 2022 | 07:07 AM
  #20723  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,970
From: Welland,Ont Canada
I’ve edited some posts , Please, no more political content, per site rules, thank you.

Today another ride to the hospital in the BlackSwan, Sweetie’s blood work and assessment for tomorrow’s chemotherapy.

Thank you , Ronnie, she’s doing alright for now.
Old Feb 22, 2022 | 07:27 AM
  #20724  
Radco's Avatar
Senior Member
 
Joined: 11-04-2012
Posts: 1,548
From: Dedham Maine
Steve Best to your wife !

Gave the HHR a bath and liking the clearer headlight lens and New bulbs ! 11 years from the OEM Bulbs pretty good lol
Weather here is crazy, hitting the mid to high 40s and a few day 50*s the back to teens and snow :O
Old Feb 22, 2022 | 07:55 AM
  #20725  
Lonwane's Avatar
Premium Member
 
Joined: 03-12-2017
Posts: 1,246
From: Phoenix
LED's do project almost the same light spread as incadesant.
I however, like the brightness of 5700k bulbs.
And to prevent f'lashing', I turned mine down 1 rotation of the adjustment screw.
Old Feb 22, 2022 | 09:01 AM
  #20726  
Cheap Guy's Avatar
Senior Member
 
Joined: 09-07-2021
Posts: 302
From: Michigan
Originally Posted by Radco
Finished but not coated, will try 1 more time to see if it gets better




After coating Looks a bit better

"
I would suggest when using the kits to start with one or two grade of higher sandpaper purchased from the hardware store than what comes in the kit. It’s crucial to get the first layer of cloudiness off, especially if it’s as cloudy as yours were. Then I take gradual steps up (down) in coarseness, using hand sanding and the sanding wheel, using spray water liberally to reduce clogging, again being patient with the sanding. I did mine in August and so far the results have lasted.
Old Feb 22, 2022 | 09:04 AM
  #20727  
Cheap Guy's Avatar
Senior Member
 
Joined: 09-07-2021
Posts: 302
From: Michigan
Originally Posted by Lonwane
LED's do project almost the same light spread as incadesant.
I however, like the brightness of 5700k bulbs.
And to prevent f'lashing', I turned mine down 1 rotation of the adjustment screw.
I got the same LEDs as OldBlue and have never been flashed. I was skeptical but I really like them so far. And at less than $25 a pair, it was cost effective. I did keep the old bulbs of course if I have any issues but none so far.
Old Feb 22, 2022 | 09:46 AM
  #20728  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,970
From: Welland,Ont Canada
I stopped by my local parts palace, picked up a Dorman H13 male and female harness for $15.00 and soldered the parts I needed to repair the damaged connector, fixed, now I wait until the rain stops to put the repaired bulb back in the BlackSwan.

we had a comfortable drive to the hospital, then we’re going to stop and pick up lunch!
Old Feb 22, 2022 | 10:01 AM
  #20729  
PulpFriction's Avatar
Senior Member
 
Joined: 12-05-2014
Posts: 3,349
From: Northern Ohio
Originally Posted by Oldblue
I’ve edited some posts…
For off-topic, there’s always the lounge, right? Maybe someone should turn on the lights, dust off the furniture, and build a fire.
Old Feb 22, 2022 | 11:02 AM
  #20730  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,970
From: Welland,Ont Canada
Yes there’s the lounge, but still no political content please, news information ok, but political opinions, any that sort are frowned on.



All times are GMT -5. The time now is 05:25 PM.