SS picture place!!!! Everyone take your best pic and post! 640 x 480 MAX!!!
#32
Those of you with kids will like this one. I needed to get a couple booster seats to keep in the HHR so I can take the kids places. I bought a pair of these for only $20 each at Toys'R'Us.
http://www.gracobaby.com/catalog/pro...G&CategoryID=1
They match in interior perfect! Each one has a pair of cup holders so that makes 5 holders for the back seat area.
They have other colors and models of the turbo booster seats and i'm sure you can find a nice one for your own ride if you need oneGuess what?? They are called (very appropriate for this HHR SS) Turbo Boosters..... Here is the picture of them in the HHR.....
http://www.gracobaby.com/catalog/pro...G&CategoryID=1
They match in interior perfect! Each one has a pair of cup holders so that makes 5 holders for the back seat area.
They have other colors and models of the turbo booster seats and i'm sure you can find a nice one for your own ride if you need oneGuess what?? They are called (very appropriate for this HHR SS) Turbo Boosters..... Here is the picture of them in the HHR.....
And as for the comment, "don't they all look the same?", they might stock, but hopefully mine won't be stock for too long!
#33
I don't have very many pics yet. But I give you what I got. ANyone like my custom dash? It matches the interior perfectly.
Last edited by HillsdaleHHR; 08-17-2008 at 08:01 PM. Reason: Reduced pic sizes
#35
Not sure how on the sticks, but it should be very similar. Remove the coin holder or what ever you want to call it in front of the shifter by prying it out strait up, then remove 2 screws that are hidden under the coin holder. Remove the shifter chrome ring around the base of shifter then raise up the shifter cover from the rear. After that you can release all the tabs that hold the "instrument panel accessory trim plate assembly" (proper GM term). After that, I removed all the vents and the switches and had the painter at the boby shop match the paint with the coin holder and tape off the outer edge and shoot it. I also removed the shifter housing cover and shot it silver also.