Hey everyone, new to the site and also to the Heritage High Roof. I was wondering if there is a reputable dealer that can do a Stage One install in the Kansas area? I am in Garden City which is a hub. I have a few options to go within a 3 to 4 hour drive such as Colorado, Oklahoma, Texas, and even Nebraska. Please let me know of any suggestions. Thanks.

 

Good luck some one will answer you sorry I live in Chicago - Welcome to the site

 

Welcome to the site Martial Law had mine done in WA.

 

Any GM dealer can install it. If they mess it up its under warranty. Mine was the firste ver installed by my dealer, no problems what so ever and its been done since fall of 2009.

By the way I use to live in Manhattan and graduated from Junction City HS. Then me and the wife moved to Kansas again for 2 years (from Alabama), we lived in Concordia, before moving back to Alabama.

 

All I can say from previous install and issues...Get them to Solder the wires....But to each there own... I had a gremlin and so did others and soldering the wires POOF no more gremlin....

 

Thanks for the replies. I talked to my local stealership and they can do it for $85 and hour at two hours. The cheapest kit I found was $473. Definitely going to get it done along with some other goodies. Researching about this upgrade made me realize that i will have to get the connections soldered and heat shrinked for longevity.

 

If the stage 1 kit is not enough ummff for you you could look into adding a trifecta tune on top of the stage one

 

I am new to the HHR but not to hot rodding/street rodding.

I took delivery on my new (left over) 2010 last Monday 2/28/2011. I had a chevy dealer (that I trust) install the stage 1 up grade/boost kit two days later on Wednesday. You will NOT be disappointed in the results. My guess is the HHR will turn high 13's. It is quick/very torquey and with the competitive/launch control system on it is a rocket out of the hole.

I had the HHR on the dyno machine last Friday. 297 hp/357 pounds of torque. As long as a Chevy dealer installs the stage one - the stage 1 stays in warranty the balance of the factory your warranty. Have fun.

Davis Moore/Chevrolet ask for Brian installed my boost kit. They are performance oriented are reliable and will do a good job. It's not cheap - but well worth the additional performance.

 

hi -I am new to the HHR but not to hot rodding/street rodding.

I took delivery on my new (left over) 2010 last Monday 2/28/2011. I had a chevy dealer (that I trust) install the stage 1 up grade/boost kit two days later on Wednesday. You will NOT be disappointed in the results. My guess is the HHR will turn high 13's. It is quick/very torquey and with the competitive/launch control system on it is a rocket out of the hole.

I had the HHR on the dyno machine last Friday. 297 hp/357 pounds of torque. As long as a Chevy dealer installs the stage one - the stage 1 stays in warranty the balance of the factory your warranty. Have fun.

Davis Moore/Chevrolet ask for Brian installed my boost kit. They are performance oriented are reliable and will do a good job. It's not cheap - but well worth the additional performance.