Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

Key fob cleaning

Old Nov 16, 2017 | 03:27 PM
  #1  
Cat Man HHR's Avatar
Thread Starter
Senior Member
 
Joined: 08-03-2010
Posts: 3,564
From: Lake Ronkonkoma, N.Y.
Key fob cleaning

My fob buttons like a lot of others gives us grief. I cleaned the grid with an eraser and Isopropyl along with swabbing the buttons too. It work but not all the time and my self start had no response. So as a test I wiped down all contact area's with a microfiber cloth. Works a lot better and the remote start works.
I did see that the height of the carbon buttons were a little low/worn. Before using the towel I made tin foil pads to go over the indents where the carbon buttons were but that did nothing.
Don't know how long this will last as it is a science project.
Sent a message to a dealer on E-Bay about replacement contact covers waiting to hear back. Will inform members about this. They were selling a different button set up for $7 for two fobs with free shipping from Farmingdale N.Y.
As a side note maybe I should try a fine scotch bright pad on the grid of my other fob and see what happens, as that one is lazy also.
Old Nov 16, 2017 | 05:09 PM
  #2  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,480
From: Fredericksburg,VA
The tin foil trick worked forever for me. Currently I have 2 wall mounted ceiling fan remotes working the same way.

If you get the entire case the number of buttons doesn't matter. The pads used to be about $2.00. If it has an extra button for the trunk it will still work, just an extra button to look at.

Fun Fact: Remote start is Panic+Lock, you don't need the extra button.

https://www.ebay.com/itm/New-Replace...!US!-1&vxp=mtr

https://www.ebay.com/itm/new-Replace...xZZpSA&vxp=mtr
Old Nov 17, 2017 | 08:25 AM
  #3  
aradmahogany's Avatar
Senior Member
 
Joined: 09-16-2013
Posts: 1,408
From: Tampa, Florida
I ended up buying a new button pad and its been flawless. My other FOB is out of commission because I need to re sodder (spelling?) the Battery holder on the circuit board (someday)

I tried tin foil but it failed after 1.5 years
Old Nov 17, 2017 | 08:33 AM
  #4  
firemangeorge's Avatar
Platinum Member
 
Joined: 12-06-2009
Posts: 11,719
From: Alabama
"Sodder" is good if yer talkin with a southern drawl.

Otherwise, it's solder.
Old Nov 17, 2017 | 09:07 AM
  #5  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,972
From: Welland,Ont Canada
Tin foil didn’t work on mine! I bought a new rubber keypad and case for $2.50 in EBay


Old Nov 24, 2017 | 02:22 PM
  #6  
Cat Man HHR's Avatar
Thread Starter
Senior Member
 
Joined: 08-03-2010
Posts: 3,564
From: Lake Ronkonkoma, N.Y.
Originally Posted by Oldblue
Tin foil didn’t work on mine! I bought a new rubber keypad and case for $2.50 in EBay


Neither for me. I too bought the same thing Blue. But it cost me $4.50 each, lol. Maybe Canada is cheaper on EBay.
The new pad has carbon buttons much taller than the originals and they have a grid pattern on them. Wish I could see a real new OEM to see if it is the same.
But as they say of TV when buying that $19.99 thing with free shipping and get a second one free, "Amazing !"
Old Nov 24, 2017 | 03:32 PM
  #7  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,972
From: Welland,Ont Canada
I ordered five years ago, inflation, maybe?
Order now our operators are standing by!
I guess they’re to cheap to buy them chairs!
Old Nov 24, 2017 | 03:58 PM
  #8  
Cat Man HHR's Avatar
Thread Starter
Senior Member
 
Joined: 08-03-2010
Posts: 3,564
From: Lake Ronkonkoma, N.Y.
Originally Posted by Oldblue
Order now our operators are standing by!
I guess they’re to cheap to buy them chairs!
A little humor from the Great White North yeh? Remember Second City TV ?
Old Nov 24, 2017 | 04:07 PM
  #9  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,972
From: Welland,Ont Canada
I studied at Second City at the Old Firehall in Toronto in 1980. But I was funny before that, mostly peculiar, not haha, so much!
I got on stage for an open mike improv night, I was voted most likely to be a writer! And laugh at myself and not just in the mirror!
Old Nov 24, 2017 | 04:10 PM
  #10  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,509
From: California
Back in the day, a DJ on one of our local radio stations used to say that he had a face made for radio!!

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:01 PM.