Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

P0172 Code- Help Please

Thread Tools
 
Search this Thread
 
Old 01-14-2019, 10:12 AM
  #91  
Moderator
 
donbrew's Avatar
 
Join Date: 01-23-2009
Location: Fredericksburg,VA
Posts: 24,717
You don't need to hold the key, it is a momentary contact switch. The starter stops when the engine starts or it times out.

Do you mean RS does not turn the starter motor when cold?

The slow start after a sit says "no gas in pipeline".
donbrew is offline  
Old 01-14-2019, 11:21 AM
  #92  
Senior Member
Thread Starter
 
cturboaddict's Avatar
 
Join Date: 12-10-2010
Location: Collinsville, IL
Posts: 128
Originally Posted by donbrew
You don't need to hold the key, it is a momentary contact switch. The starter stops when the engine starts or it times out.

Do you mean RS does not turn the starter motor when cold?

The slow start after a sit says "no gas in pipeline".
No, RS will crank just no fire.
I've had slow start with pressure at the rail.
I've tried letting the fuel pump prime fully then turning to start. Still long crank.
cturboaddict is offline  
Old 01-14-2019, 12:48 PM
  #93  
Moderator
 
donbrew's Avatar
 
Join Date: 01-23-2009
Location: Fredericksburg,VA
Posts: 24,717
Then it is the too much air.
donbrew is offline  
Old 01-14-2019, 12:50 PM
  #94  
Senior Member
Thread Starter
 
cturboaddict's Avatar
 
Join Date: 12-10-2010
Location: Collinsville, IL
Posts: 128
Originally Posted by donbrew
Then it is the too much air.
Like Throttle Body sticking open? Or vac leak?
cturboaddict is offline  
Old 01-14-2019, 01:34 PM
  #95  
Administrator
 
Oldblue's Avatar
 
Join Date: 10-13-2011
Location: Welland,Ont Canada
Posts: 36,558
Like vapour line rusted, pinholes.
Oldblue is offline  
Old 01-14-2019, 01:43 PM
  #96  
Senior Member
Thread Starter
 
cturboaddict's Avatar
 
Join Date: 12-10-2010
Location: Collinsville, IL
Posts: 128
Originally Posted by Oldblue
Like vapour line rusted, pinholes.
Replaced the line.
cturboaddict is offline  
Old 01-14-2019, 05:08 PM
  #97  
Moderator
 
donbrew's Avatar
 
Join Date: 01-23-2009
Location: Fredericksburg,VA
Posts: 24,717
Originally Posted by cturboaddict
List of repairs this weekend. Still have the hard start condition. It is ONLY when it has sat for hours. Like overnight. And you need to tap the gas pedal to get it to start (Don't ask me why, it just helps. If you just hold the key it will take quite some time to get starter). Either way, It will stumble for a couple seconds, then smooths out. The remote start does NOT work to start the car when it's cold.

Fuel Injectors and Isolators- This slowed the dropping psi with Key On engine Off. Engine Still sluggish on start.
Spark Plugs- I was there, why not.
EVAP line- No change
Fuel Pump- No Change

Now- even though the hard start issue is still there. The car does run much bettter after it's been started.
Any thoughts what to look into now? Currently there aren't any codes, but during the process I did have a P0172 code still pop up once. (It erased itself after the battery disconnect)

Any thoughts on what I can look into now?
When?
donbrew is offline  
Old 01-14-2019, 06:23 PM
  #98  
Senior Member
Thread Starter
 
cturboaddict's Avatar
 
Join Date: 12-10-2010
Location: Collinsville, IL
Posts: 128
Originally Posted by donbrew
When?
Sorry bud, not sure what you're asking here. When what?
cturboaddict is offline  
Old 01-14-2019, 08:44 PM
  #99  
Administrator
 
Oldblue's Avatar
 
Join Date: 10-13-2011
Location: Welland,Ont Canada
Posts: 36,558
So, back to a leak vacuum or exhaust

https://www.obd-codes.com/p0172
Oldblue is offline  
Old 01-15-2019, 05:58 AM
  #100  
Senior Member
Thread Starter
 
cturboaddict's Avatar
 
Join Date: 12-10-2010
Location: Collinsville, IL
Posts: 128
Originally Posted by Oldblue
So, back to a leak vacuum or exhaust

https://www.obd-codes.com/p0172
I'm going to check vacuum this weekend. I've tried spraying brake clean around the engine bay while running with no changes in engine RPM.
I have a gauge, I'll see where I can T in to check.
I've been over the exhaust plenty of times, I'm not seeing anything or hearing anything.

I started the car this morning for my wife before I left. Still hard start.
Just turning the key won't start the car. You have to hold the key down in start and feather the pedal to get it to stumble to life. Once started Runs great.
Currently no Check Engine Light, just the hard start.
cturboaddict is offline  


Quick Reply: P0172 Code- Help Please



All times are GMT -5. The time now is 05:47 PM.