Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

Transmission problems...

Old Mar 29, 2012 | 09:21 AM
  #1  
Doog47's Avatar
Thread Starter
New Member
 
Joined: 07-26-2010
Posts: 19
From: Courtice,Ont,Canada
Transmission problems...

Just wondering if any of you guys have had the same problem that im having..Im getting like a clunk noise everytime my transmission goes through the gears..Its not happening everytime just once in awhile..Any imput would be great...My hhr has about 60000 miles on it..07
Old Mar 29, 2012 | 01:03 PM
  #2  
843de's Avatar
Deceased
 
Joined: 06-30-2010
Posts: 25,739
From: Kannapolis NC
Is this a harsh sound followed by the transmission "banging" into the next gear, or is it more of a "thump" as it shifts?
Old Mar 30, 2012 | 06:31 AM
  #3  
Doog47's Avatar
Thread Starter
New Member
 
Joined: 07-26-2010
Posts: 19
From: Courtice,Ont,Canada
Its more of a thump..or a slight kick..and then my engine light goes on for a bit then shuts of and it repeats every so often...
Old Mar 30, 2012 | 06:59 AM
  #4  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,972
From: Welland,Ont Canada
no issues yet , but I'll pay more attention to it, in my 07 with 94,000 miles. I think I need to change my trans filter and fluid, I skipped that step awhile ago!!
Old Mar 30, 2012 | 10:32 AM
  #5  
843de's Avatar
Deceased
 
Joined: 06-30-2010
Posts: 25,739
From: Kannapolis NC
Originally Posted by Doog47
Its more of a thump..or a slight kick..and then my engine light goes on for a bit then shuts of and it repeats every so often...
OK, take it to your local auto parts store like Advance or Autozone and have them pull the codes(its free), then post them up here, it sounds like you may have a problem with the TCM(Transmission Control Module)or something else electronic.
Old Mar 30, 2012 | 12:05 PM
  #6  
us11csalyer's Avatar
Senior Member
 
Joined: 12-20-2011
Posts: 102
From: Ohio
maybe vacuum leak or vacuum valve?
Old Mar 30, 2012 | 12:08 PM
  #7  
843de's Avatar
Deceased
 
Joined: 06-30-2010
Posts: 25,739
From: Kannapolis NC
The 4T-45E transmission is all electronically controlled, long gone are the days of the vacuum modulators, there are a couple of different possibilities here but until Doog47 gets the codes pulled...it would just be guessing.
Old Mar 30, 2012 | 12:23 PM
  #8  
jtwrace's Avatar
 
Joined: 03-13-2011
Posts: 4
From: NC
My '09 with a 2.4L blew the trans up wtih 49k mls. It was so bad it cracked the case. Gm reps arrived too. I do normal highway driving at 120 mls per day. Second one seems to be better with 50k on it now. I brought it in for surging and they told me the cam phasers are bad. Flushed the trans....

fingers crossed
Old Mar 30, 2012 | 12:32 PM
  #9  
Doog47's Avatar
Thread Starter
New Member
 
Joined: 07-26-2010
Posts: 19
From: Courtice,Ont,Canada
Im also having trouble with my steering colunm..The thing raddles like a son of a ***** when im coming to a stop...Took it in to the shop a little while ago and they said they couldent find the problem and now its worse then before...
Old Mar 30, 2012 | 12:40 PM
  #10  
Snoopy's Avatar
Platinum Member
 
Joined: 05-09-2006
Posts: 6,805
From: "Upland" Mesa, Arizona
When you say, "shop" do you mean an independent auto repair or a GM Dealer?

A dealer should rapidly recognize a steering column problem. Canadian GM Dealers were issued a recall for the column. However, you MAY be to late for this, if it wasn't done already.

In any event they should know what the problem is.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:47 AM.