Lowering an SS
Senior Member
Joined: 07-15-2009
Posts: 2,070
From: Waterbury CT
LOL! Hey it would have been gold Allegerritas but Bart beat me to them! Well that, and I didn't feel like waiting 3 months for them to arrive from Italy!
EDIT: for ChevyguySS, I found my Pedders thread: https://www.chevyhhr.net/forums/show...edders+springs
Later
Allex
EDIT: for ChevyguySS, I found my Pedders thread: https://www.chevyhhr.net/forums/show...edders+springs
Later
Allex
Senior Member
Joined: 10-04-2010
Posts: 724
From: Delaware
i don't want to be a copy cat.
Senior Member
Joined: 11-11-2009
Posts: 246
From: York PA, and Clarkesville TN
You really can't have a lowered stance and the same ride quality as stock in the same package. But you can come close.
After researching all the springs out there, the choice was definately Pedders, for a number of reasons.
After installing a OTTPerformance "Hardcore" rear bar[ one inch and a quarter], the ride was'nt that much stiffer, only cornered like a "Bat out of hell".
After researching all the springs out there, the choice was definately Pedders, for a number of reasons.
After installing a OTTPerformance "Hardcore" rear bar[ one inch and a quarter], the ride was'nt that much stiffer, only cornered like a "Bat out of hell".
Senior Member
Joined: 07-15-2009
Posts: 2,070
From: Waterbury CT
Thank you very much!
Banned
Joined: 06-20-2008
Posts: 1,682
From: Chi-Towns burbs
Dont buy a knockoff bar... get the original from the designer himself. email Gloria at gloria@powell raceshop.com no spaces and tell her that Bart sent you fromt he HHR forum for a hardcore bar. OTTP knocked off johns design and even the name
Senior Member
Joined: 07-15-2009
Posts: 2,070
From: Waterbury CT
OH! You'll also want to get a set of steering rack spacers from either TTR or PRS (doesn't matter who as they're both identical). This will keep your axles aligned once you go low.Later
Allex