Turbo Tech Racing motor mounts
01-24-2016, 05:33 PM
#24
Banned
Join Date: 12-19-2015
Location: Brighton, MI
Posts: 14
NIGHT AND DAY!!! Just put the upper mount in and am really amazed at the difference. Not only does it eliminate any hop on a hard launch in a straight line but it totally eliminated the bucking I was getting when I'd try to put the power down coming out of a turn. Gone, finito. I still have some torque steer (I have 385 whp) but it's greatly reduced. Gotta get an LSD someday. Shifting is better too, much less movement when working the clutch. I already had the trans mounts and the shifter bushings, new cables, etc., so getting this much more of an improvement is a bit of a surprise. As for vibration, if there was any increase it wasn't very noticeable. Don't care anyway, the reduction in driveline lash under all conditions would far outweigh any increase. The part also looks to be very well made and went in very easily so I have nothing negative to say, especially for the price. If I get the same kind of experience with the rear sway bar (already bought it) I'll really be impressed. Maybe even enough to put the decals on the rear windows (I NEVER put decals on unless I'm being paid to, and I'm not).
01-31-2016, 07:26 PM
#25
Senior Member
Join Date: 05-29-2015
Location: Cleveland, OH
Posts: 542
Is the motor mount available for automatics? Not seeing one on the website. I've got an 08 SS/auto. It has a GEN3 LDK, but the stock mount works so that shouldn't affect anything. The mount for the manual looks identical but I have read that they are sitting at a slightly different angle.
Thanks
Thanks
01-31-2016, 07:43 PM
#26
Former Sponsor
Thread Starter
Join Date: 10-08-2007
Location: Minnesota
Posts: 1,821
Is the motor mount available for automatics? Not seeing one on the website. I've got an 08 SS/auto. It has a GEN3 LDK, but the stock mount works so that shouldn't affect anything. The mount for the manual looks identical but I have read that they are sitting at a slightly different angle.
Thanks
Thanks
Turbo Tech Racing Solid Upper Engine Mount Chevrolet Cobalt 2.2/2.4L HHR 2.0/2.2/2.4L Auto Trans
For the auto trans HHR upper engine mount.
02-29-2016, 04:43 AM
#29
Senior Member
Join Date: 08-24-2012
Location: State of Confusion, U.S.A.
Posts: 177
Sales???
Hey Aaron ! finally got a little spare change, looking at upper engine mount. Any sales on the upper engine mounts in the works? Got your sway bar under my @ss end, gets through the twisty sections ((2) 25 MPH 90's about 150' apart) in my route @ 60 MPH ! Mucho faster! (sure the Contis DWS help a wee bit!!) 