Chevy HHR Network
Here’s the sticker on my driver’s door.
Here’s the sticker on my driver’s door.
0 2024/05/21 10:05:54
Here is his built sticker on the driver’s door
Here is his built sticker on the driver’s door
0 2024/05/21 10:05:45
All the outside and inside package print looks okie dokie, salad last plugs I purchased from RA
All the outside and inside package print looks okie dokie, salad last plugs I purchased from RA
0 2024/05/16 10:30:19
0 2024/05/16 10:30:13
0 2024/05/16 10:30:08
0 2024/05/16 10:30:02
0 2024/05/16 10:29:56
0 2024/05/16 10:29:50
0 2024/05/16 10:29:44
Similar stamping #
Similar stamping #
0 2024/05/16 10:29:40
Right colour label
Right colour label
0 2024/05/16 10:29:36
0 2024/05/16 10:29:31
0 2024/05/16 10:29:27
Assembled in USA with Japan parts
Assembled in USA with Japan parts
0 2024/05/16 10:29:21
It’s no fun changing that tensioner on the side of the road in 85 F sunny weather with make shift tools, especially if the bolt is down in that oblong hole because the upper engine mount is failed
It’s no fun changing that tensioner on the side of the road in 85 F sunny weather with make shift tools, especially if the bolt is down in that oblong hole because the upper engine mount is failed
0 2024/05/15 08:03:47
For part number reference
For part number reference
0 2024/05/13 09:46:05
0 2024/05/13 06:09:13
0 2024/05/09 04:20:23
That’s the intake sensor #7 look on the exhaust side for that sensor
That’s the intake sensor #7 look on the exhaust side for that sensor
0 2024/05/09 04:10:25
See #7 , that is it, it’s held in with a bolt I believe it’s a 10mm head.
See #7 , that is it, it’s held in with a bolt I believe it’s a 10mm head.
0 2024/05/08 14:04:01
0 2024/05/05 09:04:36
0 2024/05/05 09:02:54
0 2024/04/28 10:04:15
From RA or any other parts supplier, bear in mind there are fakes out there.
From RA or any other parts supplier, bear in mind there are fakes out there.
0 2024/04/27 13:40:16
Right here under the heat shield, you have to remove the heat shield
Right here under the heat shield, you have to remove the heat shield
0 2024/04/27 13:28:49
2006 2.4
2006 2.4
0 2024/04/27 10:17:25
You can just see that sensor on the negative cable by the red piece above the negative terminal.
You can just see that sensor on the negative cable by the red piece above the negative terminal.
0 2024/04/24 13:38:13
From today’s RA site.
From today’s RA site.
0 2024/04/23 06:25:07
These in CDN funds
These in CDN funds
0 2024/04/23 06:25:04
Brake pedal side up under the dashboard
Brake pedal side up under the dashboard
0 2024/04/23 04:45:45
Master cylinder side of the booster
Master cylinder side of the booster
0 2024/04/23 04:45:41
This photo is from the CarID website , the booster would be in between the master cylinder and the push rod
This photo is from the CarID website , the booster would be in between the master cylinder and the push rod
0 2024/04/23 04:41:23
I just took it out from the shed, the new owner put fuel in it and he started it right up, first pull. That’s quality!
I just took it out from the shed, the new owner put fuel in it and he started it right up, first pull. That’s quality!
0 2024/04/21 09:05:52
It served it’s purpose
It served it’s purpose
0 2024/04/21 09:05:42
Off to a new home!
Off to a new home!
0 2024/04/21 06:11:21
These were the parts to installed. All went pretty good until the left rear shock lower bolt broke. RA has them in stock and will be here Tuesday. Tomorrow I drill out and extract the bolt shank
These were the parts to installed. All went pretty good until the left rear shock lower bolt broke. RA has them in stock and will be here Tuesday. Tomorrow I drill out and extract the bolt shank
0 2024/04/20 16:38:03
0 2024/04/19 03:47:58
These 4 bolts^^^^^
These 4 bolts^^^^^
0 2024/04/14 06:31:44
These four bolts, they are 7mm , tighten them past any clicking.
These four bolts, they are 7mm , tighten them past any clicking.
0 2024/04/03 12:56:49
0 2024/03/25 14:36:07