Chevy HHR Network
0 2024/05/25 05:25:09
0 2024/05/30 03:25:04
0 2024/06/08 13:02:49
I suggest you pop it out, clean the foam off and reinstall it with some silicone grease around the opening to allow easier installation and some water protection
I suggest you pop it out, clean the foam off and reinstall it with some silicone grease around the opening to allow easier installation and some water protection
0 2024/06/10 07:12:40
0 2024/06/12 12:20:37
This much slack was enough wear thru the top guide and damage the front guide.
This much slack was enough wear thru the top guide and damage the front guide.
0 2024/06/15 05:17:11
0 2024/06/16 17:52:44
A slack chain before the front guide broke!
A slack chain before the front guide broke!
0 2024/06/17 09:46:07
Our HHR 4T45E axle nut is a 30 mm I searched Detroit axle site most are out of stock, non are listed as don’t require the stub shaft. I have that axle here for the hhr
Our HHR 4T45E axle nut is a 30 mm I searched Detroit axle site most are out of stock, non are listed as don’t require the stub shaft. I have that axle here for the hhr
0 2024/06/21 11:34:26
0 2024/06/22 06:21:16
0 2024/06/22 13:29:58
0 2024/06/25 13:55:27
These four 7 mm boots !
These four 7 mm boots !
0 2024/06/25 13:55:31
0 2024/06/27 08:12:59
Both show HHR 2006.
Both show HHR 2006.
0 2024/06/27 08:13:02
No correction required, it’s a code for a random misfire
No correction required, it’s a code for a random misfire
0 2024/06/28 05:50:53
No correction required, the code is about a random misfire, not a specific cylinder
No correction required, the code is about a random misfire, not a specific cylinder
0 2024/06/28 05:52:55
This should be tight to the body and door.
This should be tight to the body and door.
0 2024/06/30 12:20:23
0 2024/06/30 12:36:06
Possibly the left unit has a more robust nylon arm at the shifter ball
Possibly the left unit has a more robust nylon arm at the shifter ball
0 2024/07/01 08:00:56
0 2024/07/03 05:13:46
Everyone enjoy this day ! Independence Day!
Everyone enjoy this day ! Independence Day!
0 2024/07/04 04:51:37
Like this one but the OEM bolts are 14mm 2.0 thread so make the threaded hole that size
Like this one but the OEM bolts are 14mm 2.0 thread so make the threaded hole that size
0 2024/07/06 10:31:36
Rolled over the 200,000 mile mark a month or two ago.
Rolled over the 200,000 mile mark a month or two ago.
0 2024/07/06 12:41:15
0 2024/07/06 12:41:19
The red cover is over that junction of the two red wires. And the 4 , 7 mm bolts to tighten.
The red cover is over that junction of the two red wires. And the 4 , 7 mm bolts to tighten.
0 2024/07/08 12:54:51
0 2024/07/09 15:13:23
0 2024/07/09 15:15:00
0 2024/07/09 15:17:33
0 2024/07/09 15:22:33
It blowed up real good.
It blowed up real good.
0 2024/07/10 14:02:11
0 2024/07/11 04:26:20
0 2024/07/11 09:30:18
So yes exchange adds to the price.
So yes exchange adds to the price.
0 2024/07/12 05:35:18
Crank those 4 , 7 mm bolts down tight! The red boot on the lower left of the photo is the positive battery cable from the battery and then to the starter
Crank those 4 , 7 mm bolts down tight! The red boot on the lower left of the photo is the positive battery cable from the battery and then to the starter
0 2024/07/12 13:45:44
US is 28.99 , I pay the $39.53 CAD way mores then . 32 cents on the dollar
US is 28.99 , I pay the $39.53 CAD way mores then . 32 cents on the dollar
0 2024/07/13 07:58:49
0 2024/07/14 04:57:43
0 2024/07/14 07:35:49
0 2024/07/14 09:53:30
The cable junction is under that red cover on the lower left in the photo.
The cable junction is under that red cover on the lower left in the photo.
0 2024/07/14 09:53:35