Chevy HHR Network
It’s not a hard job just take your time and if you get stuck check our how to section!
It’s not a hard job just take your time and if you get stuck check our how to section!
0 2024/11/21 09:29:09
Here’s the part numbers RockAuto has a good price
Here’s the part numbers RockAuto has a good price
0 2024/11/20 14:20:21
These end links, seeing as you must remove the strut end most likely damaging it order two one for each side
These end links, seeing as you must remove the strut end most likely damaging it order two one for each side
0 2024/11/20 14:18:19
The part numbers are above
The part numbers are above
0 2024/11/20 14:16:55
0 2024/11/14 14:04:11
This doesn’t appear to be stock
This doesn’t appear to be stock
0 2024/11/10 11:05:35
Perhaps RJ can confirm
Perhaps RJ can confirm
0 2024/11/10 11:03:16
I got this one , same as the one from Cloyes
I got this one , same as the one from Cloyes
0 2024/11/09 05:15:26
The rims I removed the chrome plastic covers from back in September. The colour looks good to me.
The rims I removed the chrome plastic covers from back in September. The colour looks good to me.
0 2024/11/07 12:39:17
0 2024/11/02 15:03:28
0 2024/11/02 15:03:24
0 2024/11/02 15:03:20
0 2024/11/02 15:03:16
0 2024/11/02 15:03:13
0 2024/11/02 15:03:09
0 2024/10/31 10:36:30
0 2024/10/24 04:18:33
He invited my to his shop for more photos and details, some time in November.
He invited my to his shop for more photos and details, some time in November.
0 2024/10/19 15:28:49
A closer look
A closer look
0 2024/10/19 12:27:22
That black rubber pipe
That black rubber pipe
0 2024/10/19 12:27:18
These 4 bolts , they are 7 mm . Tighten them real tight.
These 4 bolts , they are 7 mm . Tighten them real tight.
0 2024/10/19 05:31:22
Those four bolts ^^^^^
Those four bolts ^^^^^
0 2024/10/18 09:48:22
This sag gave me codes
This sag gave me codes
0 2024/10/15 09:43:07
Try blowing air thru the under hood EVAP valve, it should be closed. Replace the valve if air does pass thru it.
Try blowing air thru the under hood EVAP valve, it should be closed. Replace the valve if air does pass thru it.
0 2024/10/14 05:22:49
0 2024/10/14 05:22:01
Here is tge O2 sensor with a light coat of copper never seize ready to go into the new converter pipe.
Here is tge O2 sensor with a light coat of copper never seize ready to go into the new converter pipe.
0 2024/10/12 08:26:13
You can see the cut marks here in the old pipe bung
You can see the cut marks here in the old pipe bung
0 2024/10/12 08:26:08
Cool looking panel!
Cool looking panel!
0 2024/10/07 13:38:05
That’s the flex vinyl pipe that goes to the fuel pump
That’s the flex vinyl pipe that goes to the fuel pump
0 2024/09/27 15:57:36
This valve
This valve
0 2024/09/27 11:26:21
0 2024/09/26 13:36:57
0 2024/09/26 13:36:56
But may be it’s tge white doors
But may be it’s tge white doors
0 2024/09/26 07:40:46
0 2024/09/23 10:35:19
That’s my hands way back in the day
That’s my hands way back in the day
0 2024/09/21 20:02:20
The hole is 55 mm the cap is 55.1 mm nice and tight fit!
The hole is 55 mm the cap is 55.1 mm nice and tight fit!
0 2024/09/21 12:20:40
These 4 , 7 mm bolts tighten them past any clicking to tight, the pins have to be pulled in tight to ensure a solid connection
These 4 , 7 mm bolts tighten them past any clicking to tight, the pins have to be pulled in tight to ensure a solid connection
0 2024/09/21 09:03:15
I’m letting them cure overnight.
I’m letting them cure overnight.
0 2024/09/20 16:12:06
The opening at the flanges with rusted off fasteners.
The opening at the flanges with rusted off fasteners.
0 2024/09/19 07:04:59
These 2 will be done tomorrow afternoon, weather and my stamina permitting.
These 2 will be done tomorrow afternoon, weather and my stamina permitting.
0 2024/09/17 14:01:44