Part Numbers for elusive and common parts - Broken into separate posts in this thread
10-03-2019, 09:11 PM
#11
Platinum Member
Thread Starter
Join Date: 04-09-2006
Location: Vancouver, BC, Canada
Posts: 7,032
Fuel Line repair Kit:
Manufacturer - https://www.inlinetube.com/products/nfr0019
Ebay seller - https://www.ebay.ca/itm/202668477289?ul_noapp=true (if an obsolete link, search Ebay for "Fuel & Vapor Vent Line Full Kit 06-11 Chevrolet Chevy HHR")
For info and instructions, refer to https://www.chevyhhr.net/forums/how-...follies-62310/
Manufacturer - https://www.inlinetube.com/products/nfr0019
Ebay seller - https://www.ebay.ca/itm/202668477289?ul_noapp=true (if an obsolete link, search Ebay for "Fuel & Vapor Vent Line Full Kit 06-11 Chevrolet Chevy HHR")
For info and instructions, refer to https://www.chevyhhr.net/forums/how-...follies-62310/
11-18-2019, 06:43 PM
#15
Senior Member
Join Date: 07-10-2008
Location: Not necessarily Humbolt County
Posts: 421
Interior door panel fasteners - The white/green clip that goes in to door usually breaks when you pry off the panel.
Black pin (on the panel) with white clip (goes in the door) - 11562256
Green pin (on the panel) with with yellow clip (goes in the door) - 11562257
Push pin- goes in side of door (push in center to remove, pull pin out to install and push flush to lock)
Ebony/Black - 22690838
Gray - 15341105
Black pin (on the panel) with white clip (goes in the door) - 11562256
Green pin (on the panel) with with yellow clip (goes in the door) - 11562257
Push pin- goes in side of door (push in center to remove, pull pin out to install and push flush to lock)
Ebony/Black - 22690838
Gray - 15341105
Last edited by terryk; 11-20-2019 at 04:55 PM.
08-02-2020, 08:46 AM
#16
Senior Member
Join Date: 01-16-2017
Location: Ohio
Posts: 362
LS/LT front struts,
Upper coil spring plates plate GM 22716379, the tab is to point towards the body opposite the steering knuckle bracket.
KYB Excel-G has struts, 339084 passenger side and
339085 drivers side
Moog K160052 strut mount bearing plates
the three top plate nuts are torqued to 15 ft/lbs.
the two knuckle bolts are torqued to 85 ft/lbs
The nut at the top of strut gets torqued to 52 ft/lbs
Please be very careful and use a coil spring compresser designed for MacPherson struts
This applies to SS also.
Upper coil spring plates plate GM 22716379, the tab is to point towards the body opposite the steering knuckle bracket.
KYB Excel-G has struts, 339084 passenger side and
339085 drivers side
Moog K160052 strut mount bearing plates
the three top plate nuts are torqued to 15 ft/lbs.
the two knuckle bolts are torqued to 85 ft/lbs
The nut at the top of strut gets torqued to 52 ft/lbs
Please be very careful and use a coil spring compresser designed for MacPherson struts
This applies to SS also.
Last edited by Oldblue; 08-02-2020 at 09:31 AM. Reason: House keeping thank you
Thread
Thread Starter
Forum
Replies
Last Post