Chevy HHR Network

2.0L Performance Tech 260hp (235hp auto) Turbocharged SS tuner version. 260 lb-ft of torque

Problem With HP E47 tune

   
Old Aug 25, 2016 | 01:20 AM
Share
  #1  
Nazgul 9
Guest
 
Posts: n/a
Problem With HP E47 tune
So I finally got the HP E47 tune loaded onto my ecm.. and its idling crazy... up down...up down....and i have a p0557 code....any ideas???


Thanks
Vince
Reply
Old Aug 25, 2016 | 02:10 AM
Share
  #2  
whopper's Avatar
whopper
Platinum Member
 
Joined: 04-09-2006
Posts: 7,043
From: Vancouver, BC, Canada
Have you looked up the code? ie: P0557 Brake Booster Pressure Sensor Circuit Low Voltage OBDII Engine Light Trouble Code | Engine-Codes.com
Reply
Old Aug 25, 2016 | 03:03 AM
Share
  #3  
Nazgul 9
Guest
 
Posts: n/a
I am sorry I should have stated I did indeed look up the code I was wondering if anyone else had this problem or this code???
Reply
Old Aug 25, 2016 | 09:50 AM
Share
  #4  
whopper's Avatar
whopper
Platinum Member
 
Joined: 04-09-2006
Posts: 7,043
From: Vancouver, BC, Canada
Using the SEARCH tool at the top of the page showed only 1 thread discussing the p0557 code - and traced it back to a bad connection - https://www.chevyhhr.net/forums/hhr-...-20946/page14/

But it is a thread from way back in 2009.
Reply
Old Aug 25, 2016 | 10:57 AM
Share
  #5  
donbrew's Avatar
donbrew
Moderator
 
Joined: 01-23-2009
Posts: 26,532
From: Fredericksburg,VA
I am thinking the erratic idle is causing the brake booster problem, or the brake booster vacuum line is disconnected
Reply
Old Aug 25, 2016 | 11:36 AM
Share
  #6  
DrLoch's Avatar
DrLoch
Senior Member
 
Joined: 09-07-2008
Posts: 1,016
From: Mebane, NC
Lets back up here for just a second.

Who's tune is it? Was it fine before you put the new tune in?
Reply
Old Aug 25, 2016 | 11:56 AM
Share
  #7  
Nazgul 9
Guest
 
Posts: n/a
Its 2005HHRAUTOS E47 HPTune and it is a new ecm just got flashed had no problems or codes...
Reply
Old Aug 25, 2016 | 12:02 PM
Share
  #8  
donbrew's Avatar
donbrew
Moderator
 
Joined: 01-23-2009
Posts: 26,532
From: Fredericksburg,VA
Same sensors as 2005HHRAUTO has?
Reply
Old Aug 25, 2016 | 12:04 PM
Share
  #9  
Nazgul 9
Guest
 
Posts: n/a
do you mean 2bar or 3 bar?? cause I am honestly not sure and I was thinking about that myself...
Reply
Old Aug 25, 2016 | 12:23 PM
Share
  #10  
DrLoch's Avatar
DrLoch
Senior Member
 
Joined: 09-07-2008
Posts: 1,016
From: Mebane, NC
Originally Posted by Nazgul 9
do you mean 2bar or 3 bar?? cause I am honestly not sure and I was thinking about that myself...
Bingo. He's using 3 bar sensors, if you haven't changed your sensors that is your issue. Put the stock tune back in it and do some more reading.
Reply

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:07 AM.