Sway bars on my 2009 HHR Panel
Senior Member
Joined: 09-07-2008
Posts: 237
From: NorCal
Not sure what your definition of "too stiff" is but the TTR bar feels just right on my SS. Nothing harsh about it's effect that I can tell, it just leveled the cornering out quite dramatically.
Former Sponsor
Joined: 10-08-2007
Posts: 1,821
From: Minnesota
Senior Member
Joined: 08-19-2007
Posts: 829
From: So.Cal.
I have the Progress bar and it almost took longer to read the directions then install. Real simple and no modifications to do. Just bolt in and play.
Last edited by Hotrodbob; Dec 12, 2009 at 10:44 PM. Reason: ms spillin
Platinum Member
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Another step in the right direction is at least leveling the Panel..
+ (of course) the sway Bar.
I used '09 Cobalt SS/TC rear springs to level mine. BIG improvement..They are firmer than the 'Balt SS-SC earlier springs..But almost same as my OE 'FE3 Sport-tuned rear springs' were, maybe a bit tighter. Which is what I wanted...Since I haul stuff too..
+ (of course) the sway Bar.
I used '09 Cobalt SS/TC rear springs to level mine. BIG improvement..They are firmer than the 'Balt SS-SC earlier springs..But almost same as my OE 'FE3 Sport-tuned rear springs' were, maybe a bit tighter. Which is what I wanted...Since I haul stuff too..
Senior Member
Joined: 08-19-2007
Posts: 829
From: So.Cal.
Another step in the right direction is at least leveling the Panel..
+ (of course) the sway Bar.
I used '09 Cobalt SS/TC rear springs to level mine. BIG improvement..They are firmer than the 'Balt SS-SC earlier springs..But almost same as my OE 'FE3 Sport-tuned rear springs' were, maybe a bit tighter. Which is what I wanted...Since I haul stuff too..
+ (of course) the sway Bar.
I used '09 Cobalt SS/TC rear springs to level mine. BIG improvement..They are firmer than the 'Balt SS-SC earlier springs..But almost same as my OE 'FE3 Sport-tuned rear springs' were, maybe a bit tighter. Which is what I wanted...Since I haul stuff too..
Platinum Member
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Bob-
No cutting, just simple R&R, the 09 cobalt SS/TC rear Coil springs are 1" lower than my FE3 springs. & that's just how much they lowered the rear, which is all I needed to "level it" & sway bar is next..
I got em from GMParts online $31. ea. + shipping= $74. to my door, for the pair
GM Part # 25821162
Billy
No cutting, just simple R&R, the 09 cobalt SS/TC rear Coil springs are 1" lower than my FE3 springs. & that's just how much they lowered the rear, which is all I needed to "level it" & sway bar is next..
I got em from GMParts online $31. ea. + shipping= $74. to my door, for the pair
GM Part # 25821162
Billy
New Member
Joined: 11-01-2008
Posts: 15
From: Brook Park, Ohio
Yep, TTR Sway Bar and 09 Cobalt SS/TC Springs really do a number. HHR is exactly leveled out, sticks really well. By chance, I came across a set of Fuzion FZ1 tires in 45 series and wanted to put them on for winter-better traction that Firestones that came with it. Took a mildly banked, 270 degree ramp from I-77N to I-480W in Cleveland at 85MPH last night. Tripped the TracCntl light for a second, but the HHR never moved. Best $$ spent so far. Thanks TTR and GM Parts Direct!
Member
Joined: 01-21-2009
Posts: 47
From: Swartz Creek, Michigan
Bob-
No cutting, just simple R&R, the 09 cobalt SS/TC rear Coil springs are 1" lower than my FE3 springs. & that's just how much they lowered the rear, which is all I needed to "level it" & sway bar is next..
I got em from GMParts online $31. ea. + shipping= $74. to my door, for the pair
GM Part # 25821162
Billy
No cutting, just simple R&R, the 09 cobalt SS/TC rear Coil springs are 1" lower than my FE3 springs. & that's just how much they lowered the rear, which is all I needed to "level it" & sway bar is next..
I got em from GMParts online $31. ea. + shipping= $74. to my door, for the pair
GM Part # 25821162
Billy
Thanks.
