Making sense of this all
04-15-2008, 10:07 PM
#1
New Member
Thread Starter
Join Date: 04-14-2008
Location: Lower Burrell, PA
Posts: 28
Making sense of this all
I'm sooo confused when I read all these different things.
i.e.:
225-35-20
offset
to roll/trim fenders
etc
I'm just so lost and I'm just trying to understand and learn.
Can someone PLEASE help me out?!
i.e.:
225-35-20
offset
to roll/trim fenders
etc
I'm just so lost and I'm just trying to understand and learn.
Can someone PLEASE help me out?!
04-15-2008, 10:14 PM
#2
Senior Member
Join Date: 10-19-2005
Location: Miami
Posts: 20,687
04-15-2008, 10:32 PM
#3
Senior Member
Join Date: 09-19-2005
Location: SoCal
Posts: 169
Here is how it breaks down. 1st #, 235 is the width in millimeters. 2nd #, 35 is the percentage of side wall. Let me explain: 35% of the width of the tire which was the 1st #, will be the height of the sidewall. And last is the wheel size 20". Hope this helps
04-15-2008, 10:40 PM
#5
Senior Member
Join Date: 02-28-2008
Location: South Carolina
Posts: 216
Offset/Backspace is the amount of the wheel that is behind the wheel hub. Check out this link https://www.rsracing.com/tech-wheel.html#backspace
Last edited by chevyguy; 04-15-2008 at 10:41 PM. Reason: typo
04-15-2008, 10:45 PM
#6
Senior Member
Join Date: 07-12-2006
Location: NE Ohio
Posts: 1,703
You can also check out http://www.tirerack.com/about/techcenter.jsp will tell you everything you need to know about tires & wheels! 
Thread
Thread Starter
Forum
Replies
Last Post
