Panel rear doors
Senior Member
Joined: 10-09-2010
Posts: 454
From: Indy
I have the same problem on the drivers side rear door.
I put a shim washer on the B pillar, but it was not any help,so I guess I need to pull of the door panel and shim the two bolts on the door https://www.chevyhhr.net/forums/show...p?p=345279#186
I put a shim washer on the B pillar, but it was not any help,so I guess I need to pull of the door panel and shim the two bolts on the door https://www.chevyhhr.net/forums/show...p?p=345279#186
Thread Starter
New Member
Joined: 07-24-2012
Posts: 13
From: Roswell, NM
This is common apparently. Mine would do the same thing. I could hear the actuator but no open door for a few pushes of the button. I found that if I keep the seals lubricated with dielectric grease it is no longer a problem. The seals get sticky here in Texas from the heat and the grease prevents this from happening. The dielectric grease also keeps the seals from drying out.
Platinum Member
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Thread
Thread Starter
Forum
Replies
Last Post
