When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
here is my thought as i have removed alot of rear belts from wrecks use a snap-on torx and a 1/2 inch impact as they are so tuff to get the mounting bolt out we have broke alot of other bits and have found that doing it with a breaker bar wont work good luck!!
Excellent advice! I had trouble getting the bolts out on mine, even snapped a snap-on!
here is my thought as i have removed alot of rear belts from wrecks use a snap-on torx and a 1/2 inch impact as they are so tuff to get the mounting bolt out we have broke alot of other bits and have found that doing it with a breaker bar wont work good luck!!
Didn't want to hear that. I was hoping it was just going to be panel removal.