What Did You Do To Your HHR Today?
I would suggest when using the kits to start with one or two grade of higher sandpaper purchased from the hardware store than what comes in the kit. It’s crucial to get the first layer of cloudiness off, especially if it’s as cloudy as yours were. Then I take gradual steps up (down) in coarseness, using hand sanding and the sanding wheel, using spray water liberally to reduce clogging, again being patient with the sanding. I did mine in August and so far the results have lasted.
. Well temps back to teens and Snow coming :o so the lights redo will wait lol
Yesterday, Sweetie’s blood numbers failed, so she tries again on Friday!
Today we’ll take a relaxing cruise in the BlackSwan, listen to some tunes, stop for a coffee, relax and enjoy the ride!
I ordered a part from Dorman thru RockAuto, it came in , so I can repin the LED head light.
Watch for a thread on that repair soon!
Today we’ll take a relaxing cruise in the BlackSwan, listen to some tunes, stop for a coffee, relax and enjoy the ride!
I ordered a part from Dorman thru RockAuto, it came in , so I can repin the LED head light.
Watch for a thread on that repair soon!
Designed and 3D printed a phone holster with a USB cable so I can just slot my phone in and hook up to the stereo's Android Auto without too much fiddling. I'll run the cable behind the console later, I bought a second head unit that I'll be violating the warranty on to add a rear USB port and hide all the dangly bits.
Had to modify the cold air intake tube I found at the auto salvage yard.
When I went back to look at the HHR I got it off of, I noticed no windshield washer bottle.
That explained why it didn't fit on mine.
Should have looked when I was there the first time.
Also fabricated a second bracket for a more solid install.
Ordered a K&N filter to fit into the space alloted and will install next weekend.
Now debating with myself if I want to fabricate some type of shield to draw air from the hole in the inner fender
And pictures will be included.
AHH, the joy of tinkering.
When I went back to look at the HHR I got it off of, I noticed no windshield washer bottle.
That explained why it didn't fit on mine.
Should have looked when I was there the first time.
Also fabricated a second bracket for a more solid install.
Ordered a K&N filter to fit into the space alloted and will install next weekend.
Now debating with myself if I want to fabricate some type of shield to draw air from the hole in the inner fender
And pictures will be included.
AHH, the joy of tinkering.