got an 08 ss and just bought the turbo pipes from dejon and worked great for a day then lost power had no boost, so i scaned it and had code P0101 Mass Air Flow. i was thinking i had loose connections at the tubes but all look good and are tight. has anybody had any of these problems?

 

Never heard of it.

https://www.chevyhhr.net/forums/ss-specific-service-issues-repairs-61/new-filter-throwing-codes-34795/

 

These vehicles are very cantankerous.I get one from time to time I clear it with my Aeroforce.

 

Is that the only mod you have???? The ic piping has nothing to do with your MAF

 

He could be talking about an intake too, which is what I assumed. He just said 'pipes'.

 

yeah i did the ic piping and the intake pipe also. so i took the intake pipe off and put the stock intake back on same problem.

 

The fuel trims need to be reset. I'm not sure how long it would take to adjust back to a normal value on it's own, but it should eventually. You could speed up the process by clearing the code and/or disconnecting the battery.

 

i've cleared the code twice now. never had a check engine light it stored as a history code it wasn't ever a current code. seems to be fine now.

 

Yeah it takes 3 full cycles if you dont disconnect the battery. Return the intake get your money back and enjoy the stock intake my friend

 

yeah plan on returing it. thanks guys