Introductions Welcome! Please take a moment to say hello.

New HHR Owner from KY

Thread Tools
 
Search this Thread
 
Old Nov 16, 2015 | 07:19 PM
  #1  
Slaughts's Avatar
Thread Starter
 
Joined: 11-16-2015
Posts: 8
From: Kentucky
New HHR Owner from KY

Hello from Bowling Green, KY. I bought my first HHR, a black 2010 LT, this past Friday. I discovered this site when I was looking up issues regarding the low beam headlights and after spending about half an hour reading threads I'd figure I'd come on here.
Old Nov 16, 2015 | 07:28 PM
  #2  
Lucky's Avatar
Senior Member
 
Joined: 12-24-2007
Posts: 2,873
From: Seville. OH
Welcome to the site

Lot of info found on here and there a lots of people to help.
Old Nov 17, 2015 | 02:49 AM
  #3  
843de's Avatar
Deceased
 
Joined: 06-30-2010
Posts: 25,739
From: Kannapolis NC
aboard Slaughts!

Be sure to try our "Search" box at the top of the page, it's custom linked to Google, and it works a treat.
Old Nov 17, 2015 | 09:21 AM
  #4  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,986
From: Welland,Ont Canada
Welcome to the site!! Did you get the lights fixed?
Old Nov 17, 2015 | 04:52 PM
  #5  
Twistedtat's Avatar
Senior Member
 
Joined: 09-18-2013
Posts: 277
From: Missouri
Welcome to the site.
Old Nov 17, 2015 | 08:13 PM
  #6  
Slaughts's Avatar
Thread Starter
 
Joined: 11-16-2015
Posts: 8
From: Kentucky
Thanks all!

Originally Posted by Oldblue
Welcome to the site!! Did you get the lights fixed?
Not yet. I bought new bulbs, but found out I don't have the right socket to get the screws out to get back there. I'll have to wait until tomorrow or Thursday to get the right tool to put them on. I'll have to deal with pissed off drivers with my high beams until then
Old Nov 18, 2015 | 09:38 AM
  #7  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 39,986
From: Welland,Ont Canada
It's a 7 mm socket and a set of needle nose pliers for the push pins!
Old Nov 22, 2015 | 12:59 PM
  #8  
DwRed2LT's Avatar
Senior Member
 
Joined: 10-04-2013
Posts: 902
From: Gateway to the West
Welcome !
Old Nov 22, 2015 | 01:20 PM
  #9  
TurboTechRacing's Avatar
Former Sponsor
 
Joined: 10-08-2007
Posts: 1,821
From: Minnesota
Welcome!
Old Nov 26, 2015 | 11:43 AM
  #10  
Slaughts's Avatar
Thread Starter
 
Joined: 11-16-2015
Posts: 8
From: Kentucky
Originally Posted by Oldblue
It's a 7 mm socket and a set of needle nose pliers for the push pins!
Thankfully it was the bulbs. Had people at Autozone tell me it was the switch.



All times are GMT -5. The time now is 11:49 PM.