Pick-Up Ripper Project
#25
Front view, Engine will be lower, sitting on hood right now...
May try to make three(3) section/bar grill...
Man , I keep remembering all the things I want to do, and the work invovled
May try to make three(3) section/bar grill...
Man , I keep remembering all the things I want to do, and the work invovled
#26
First Cuts...
OK, Started the cutting part of the project.
First I cut the rear hatch window section off. While the roof section was still in place, it gave me a more stable platform and holding area than if I`d tried to cut it after the roof was off...
First I cut the rear hatch window section off. While the roof section was still in place, it gave me a more stable platform and holding area than if I`d tried to cut it after the roof was off...
#27
Next
Next I cut the rear passenger section off.
In the previous pic. you can see the exacto saw that I used, it didn`t take to much effort to remove this large section.
The plastic is a little cracked/brittle from the paint removing process, but ok...
These are rough cuts... some sanding and filing will be necessary.
In the previous pic. you can see the exacto saw that I used, it didn`t take to much effort to remove this large section.
The plastic is a little cracked/brittle from the paint removing process, but ok...
These are rough cuts... some sanding and filing will be necessary.
#30
The splice
In order to get this piece to fit, I`m gonna cut it right down the middle.
After cutting, I super glued a larger-ish piece of styrene to one side, then after getting a good idea how the other side would fit, I taped them both to the roof section and super glued the other side to the styrene.
This is only to hold things in place. I`m not attaching these pieces to the roof just yet...
After cutting, I super glued a larger-ish piece of styrene to one side, then after getting a good idea how the other side would fit, I taped them both to the roof section and super glued the other side to the styrene.
This is only to hold things in place. I`m not attaching these pieces to the roof just yet...