Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

A/C blower won't shut off car stalls

Old Aug 3, 2024 | 06:08 PM
  #21  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,097
From: Welland,Ont Canada
The traction and ESC lights will go out after the issue is resolved.
Old Aug 3, 2024 | 06:11 PM
  #22  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,513
From: California
You said the MAP sensor had a broken pin? You might have a look at the other half of the connection, see if something there caused it to break.
Old Aug 10, 2024 | 05:04 PM
  #23  
mallorysadie's Avatar
Thread Starter
New Member
 
Joined: 07-11-2024
Posts: 17
From: California
Originally Posted by donbrew
Has any body done any work around the dash board?
What happened just before this started?
Yes about 3 months ago my stock radio would work all the time so took it in and new stero was installed it works ok
Old Aug 10, 2024 | 09:38 PM
  #24  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,543
From: Fredericksburg,VA
The blower switch or wires could have been damaged. Or, whoever did the wiring didn't know what they were doing.
Old Aug 10, 2024 | 10:00 PM
  #25  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,513
From: California
I thought the blower issue was fixed?
Old Aug 11, 2024 | 06:48 PM
  #26  
mallorysadie's Avatar
Thread Starter
New Member
 
Joined: 07-11-2024
Posts: 17
From: California
Originally Posted by RJ_RS_SS_350
I thought the blower issue was fixed?
I'm not sure if I'm posting right, but the blower is fixed I changed the controls. My son said there was a 5 volt reference at the MAP but after checking with a new multi- meter the signal is only 2.3 I'm trying to do what you said in earlier post but I don't have a book on this car or any wire diagrams so it will take me some time to check the wires down to PCM. Is this car worth keeping it only has 140,000 on it.
Old Aug 11, 2024 | 08:56 PM
  #27  
RJ_RS_SS_350's Avatar
Moderator
 
Joined: 05-01-2014
Posts: 8,513
From: California
It's worth keeping. In donbrew's signature, there is a link to shop repair manuals downloads, including wiring diagrams. If you can't see his signature, then you're on the mobile site, you'll need to get to the "full site ".
Old Aug 17, 2024 | 01:46 PM
  #28  
mallorysadie's Avatar
Thread Starter
New Member
 
Joined: 07-11-2024
Posts: 17
From: California
Originally Posted by RJ_RS_SS_350
It's worth keeping. In donbrew's signature, there is a link to shop repair manuals downloads, including wiring diagrams. If you can't see his signature, then you're on the mobile site, you'll need to get to the "full site ".
Thank you. Have you heard that you have to program new fuel injectors? Just curious that what someone told me but I'm not sure.
Old Aug 17, 2024 | 01:50 PM
  #29  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,097
From: Welland,Ont Canada
I’ve changed many fuel injectors, never had to program them.
Old Aug 17, 2024 | 02:42 PM
  #30  
mallorysadie's Avatar
Thread Starter
New Member
 
Joined: 07-11-2024
Posts: 17
From: California
Originally Posted by Oldblue
I’ve changed many fuel injectors, never had to program them.
Thank you. Just wondering if that is why I have p0171 I do know now there is no low fuel trim it is at 0%

Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:28 PM.