crankshaft sensor wiring
Senior Member
Joined: 06-26-2006
Posts: 1,876
From: San Bernardino, California
Platinum Member
Joined: 12-06-2009
Posts: 11,720
From: Alabama
Hey Stephen. Didn't we go thru this before ? 
You and me having conflicting info from our repair manuals.
Not sure what to think. One side note though. My info and pic did come from a 2008 repair manual. That may be the difference.
You and me having conflicting info from our repair manuals.Not sure what to think. One side note though. My info and pic did come from a 2008 repair manual. That may be the difference.
Senior Member
Joined: 12-24-2008
Posts: 717
From: N/A
The problem is firemangeoge is showing a "block" diagram and db/sb is showing the actual part - they often show different things. In this case the colors and pin numbers jive with each other - there is no problem.
Moderator
Joined: 01-23-2009
Posts: 26,507
From: Fredericksburg,VA
There is a possibility that a new connector with wires is available, NAPA has many the dealer should also. Then you would just splice.
The fact that they are available should make you feel like you have company anyway.
BTW, you may have a code after you get it back together. You will need somebody with an expensive scantool to reset the CKP.
The fact that they are available should make you feel like you have company anyway.
BTW, you may have a code after you get it back together. You will need somebody with an expensive scantool to reset the CKP.
Thread
Thread Starter
Forum
Replies
Last Post
