Problems/Service/Repairs If you have a problem with your HHR, want a tip on repairing or performing a particular service to you HHR here is the place to post!

hhr transmission code p0757

Old Aug 24, 2013 | 01:39 PM
  #1  
steve walton's Avatar
Thread Starter
 
Joined: 08-22-2013
Posts: 2
From: toone tn 38381
hhr transmission code p0757

2009 hhr lt setting transmssion code po757 solenoid b curcuit stuck open, hard shift 1-2 won,t shift to 3rd, does anyone know where shift solenoid b is located searched under pan already.
Old Aug 24, 2013 | 01:46 PM
  #2  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
Basically inside the trans. But could be a wiring related issue.

There is a wiring harness connection to the trans, on the bottom. And the other end is under the Darth Vader hood in front of the fuse box.

This also could be a case where a transmission fluid flush might fix it.
Old Aug 24, 2013 | 02:10 PM
  #3  
steve walton's Avatar
Thread Starter
 
Joined: 08-22-2013
Posts: 2
From: toone tn 38381
don have flushed trans already car has 146k on speedo trying to decide if solenoid b is defective is it worth tearing into tranny to replace it as it is not located under the pan or time to trade.
Old Aug 24, 2013 | 03:12 PM
  #4  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
It's not actually in the pan, The valve body is under the side cover, not in the gear box.

Use the search tool, somebody in the last year or so went to the trouble of typing in the procedure to get to it in another thread. Basically, better left to a pro, unless you got time a good garage and a little experience. The part is cheap, the labor is probably around 12 hours.

Check your PM, I have something that may help.
Old Aug 24, 2013 | 03:58 PM
  #5  
db/sb's Avatar
Senior Member
 
Joined: 06-26-2006
Posts: 1,876
From: San Bernardino, California
I just looked at the manual and the job appears do-able with moderate skills. The service manual also states that after you change the solenoid(s):

Important: It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned.
Old Mar 14, 2021 | 03:05 PM
  #6  
fernando pena's Avatar
 
Joined: 10-20-2010
Posts: 8
From: san luis de la paz
Yo tengo ese código en mi HHR 2008 (no hay 3ra ni 4ta velocidad) he cambiado los 2 solenoides (A y B) y el problema no se resolvió.

GoOgle translate:
I have that code in my 2008 HHR (there is no 3rd or 4th speed) I have changed the 2 solenoids (A and B) and the problem was not solved.

Last edited by donbrew; Mar 14, 2021 at 04:36 PM.
Old Mar 14, 2021 | 04:36 PM
  #7  
donbrew's Avatar
Moderator
 
Joined: 01-23-2009
Posts: 26,533
From: Fredericksburg,VA
Could be:
low battery
dirty fluid/clogged internal passages
bad wiring between the TCM and the transmission.

GoOgle translate:Podría ser:
batería baja
fluido sucio / pasajes internos obstruidos
Mal cableado entre el TCM y la transmisión.
Old Mar 14, 2021 | 04:46 PM
  #8  
Oldblue's Avatar
Administrator
 
Joined: 10-13-2011
Posts: 40,083
From: Welland,Ont Canada
I suggest you change all the solenoids

https://www.chevyhhr.net/forums/driv...olenoid-61313/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastsuv
Drivetrain (Excluding Engine)
102
Apr 6, 2025 10:28 PM
98SilvZ71
Drivetrain (Excluding Engine)
6
Oct 17, 2016 12:18 PM
P0757
Drivetrain (Excluding Engine)
6
Jan 23, 2015 07:39 AM
nortonneon
Problems/Service/Repairs
6
Jul 10, 2013 02:04 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:30 AM.