P0014 Code 2011 HHR
P0014 Code 2011 HHR
About 6 ms. ago I got a P0014 code and I replaced both the the camshaft solenoid valves. All good.
Yesterday the P0014 code appeared again. Hhr has 125K miles on it.
HHR is due for an oil change so going to start with that.
Any ideas or comments are helpful.
Thanks
Yesterday the P0014 code appeared again. Hhr has 125K miles on it.
HHR is due for an oil change so going to start with that.
Any ideas or comments are helpful.
Thanks
I took the neg. off to reset the computer to see if the code came up again. And, there it is 2 codes P0014.
I am hoping it is the connections but you may be correct - the timing chain!
I am taking it to my trusted shop Tuesday to get a proper read out.
Thanks
I am hoping it is the connections but you may be correct - the timing chain!
I am taking it to my trusted shop Tuesday to get a proper read out.
Thanks
If the timing chain has jumped, further operation of the engine could destroy it. If you have the ability, remove the valve cover and take pictures of the timing chain and camshaft sprockets. Post them here, we'll see if we can help.
if you have the time a capable friend this would lessen the bill
if shop says chain
rock auto 9-4201SX ,9-4202SX, DORMAN 74114
https://www.chevyhhr.net/forums/supp...-2021-a-61707/
if shop says chain
rock auto 9-4201SX ,9-4202SX, DORMAN 74114
https://www.chevyhhr.net/forums/supp...-2021-a-61707/
Last edited by Murph; Jun 22, 2021 at 12:20 PM. Reason: forgot coupon for vendor
Update...
Did the oil change...Still got the codes.
Out of caution had the car towed to the shop.
Ran the complete diagnostic and kept getting irregular readings only on the cam actuator solenoid.
When I replaced them i used NAPA.... Maybe I got a dud...This time I am going to use AC/Delco. Replace both.
Took the valve cover off & chain looks good!!!
Did the oil change...Still got the codes.
Out of caution had the car towed to the shop.
Ran the complete diagnostic and kept getting irregular readings only on the cam actuator solenoid.
When I replaced them i used NAPA.... Maybe I got a dud...This time I am going to use AC/Delco. Replace both.
Took the valve cover off & chain looks good!!!


