Thermostat issue
Administrator
Joined: 10-13-2011
Posts: 40,096
From: Welland,Ont Canada
What is the manufacturer and part number of the thermostat you installed?
been documented here many times, these Ecotec engines only like the AC Delco 131-158 180 F degree thermostat.
https://www.chevyhhr.net/forums/how-...l-p0128-24493/
secondly are you sure you are burping any trapped air out of the cooling system? Very important to use only Dexcool 50/50 mixed coolant.
https://www.chevyhhr.net/forums/how-...-system-60614/
Please note megs posted way back in 2011
been documented here many times, these Ecotec engines only like the AC Delco 131-158 180 F degree thermostat.
https://www.chevyhhr.net/forums/how-...l-p0128-24493/
secondly are you sure you are burping any trapped air out of the cooling system? Very important to use only Dexcool 50/50 mixed coolant.
https://www.chevyhhr.net/forums/how-...-system-60614/
Please note megs posted way back in 2011
Moderator
Joined: 05-01-2014
Posts: 8,512
From: California
If you keep blowing head gaskets, there is something wrong. Possibly a warped head or block, or damage to the mating surface.
And "keeping coolant in it" says, "coolant is leaving the system, and I'm topping it off periodically". Probably leaving through the poor seal at the head gasket.
Why was the thermostat changed in September?
And "keeping coolant in it" says, "coolant is leaving the system, and I'm topping it off periodically". Probably leaving through the poor seal at the head gasket.
Why was the thermostat changed in September?
Thread
Thread Starter
Forum
Replies
Last Post
