SS Specific Service Issues/Repairs Service/Repairs specific to the SS. Turbo-Brembo Brakes-2.0 Engine-Limited Slip Differential-Programmable Display-MU3 Transmission

SS 5 speed clutch fluid??

Old Jan 20, 2011 | 02:50 PM
  #1  
bad03xtreme's Avatar
Thread Starter
Senior Member
 
Joined: 10-12-2007
Posts: 456
From: Manassas, VA
SS 5 speed clutch fluid??

I have noticed my clutch doesn't have the same resistance as it had before. Where can I check the clutch fluid, is the brake fluid also used as the clutch fluid?
Old Jan 21, 2011 | 07:24 AM
  #2  
Gas Man's Avatar
Senior Member
 
Joined: 01-04-2010
Posts: 1,584
From: Imported from Detroit
Usually but I can't speak for sure on the HHR SS.
Old Jan 21, 2011 | 07:39 AM
  #3  
1Panel2NV's Avatar
Senior Member
 
Joined: 06-16-2007
Posts: 1,259
From: Illinois
Originally Posted by bad03xtreme
is the brake fluid also used as the clutch fluid?
Yes.
Old Jan 21, 2011 | 08:33 AM
  #4  
Gas Man's Avatar
Senior Member
 
Joined: 01-04-2010
Posts: 1,584
From: Imported from Detroit
Good to know.
Old Jan 21, 2011 | 11:27 AM
  #5  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Originally Posted by 1Panel2NV
Yes.
Why would you have said it has it's own reservoir on another thread then ???????

Yes it shares the brake fluid in the same master cylinder...

Last edited by sleeper; Jan 21, 2011 at 10:54 PM.
Old Jan 21, 2011 | 04:40 PM
  #6  
1Panel2NV's Avatar
Senior Member
 
Joined: 06-16-2007
Posts: 1,259
From: Illinois
Originally Posted by sleeper
Why would have said it has it's own reservoir on another thread then ???????

Yes it shares the brake fluid in the same master cylinder...


I didn't say the brake and clutch master cylinder had separate reservoirs.
Old Jan 21, 2011 | 10:53 PM
  #7  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 16,081
From: SE USA
https://www.chevyhhr.net/forums/show...t=33399&page=4
Post # 16

Originally Posted by 1Panel2NV
The TOB and slave cylinder as you guys are calling it, is one unit between the transmission and pressure plate. I thought you were referring to the clutch master cylinder as the slave cylinder.

Misunderstanding on my part.

Originally Posted by sleeper
You sure about separate Master cylinders ?

Yes
I know you built one bad Panel, but this is your post FWIW ^
Old Jan 22, 2011 | 08:58 AM
  #8  
1Panel2NV's Avatar
Senior Member
 
Joined: 06-16-2007
Posts: 1,259
From: Illinois
Originally Posted by sleeper
https://www.chevyhhr.net/forums/show...t=33399&page=4
Post # 16



I know you built one bad Panel, but this is your post FWIW ^
Yeah, I said separate master cylinders, not separate reservoirs. I don't see what the problem is.
Old Jan 23, 2011 | 12:52 AM
  #9  
sleeper's Avatar
Platinum Member
 
Joined: 01-09-2007
Posts: 16,081
From: SE USA
Originally Posted by 1Panel2NV
Yeah, I said separate master cylinders, not separate reservoirs. I don't see what the problem is.
touche' no problem..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bad03xtreme
Maintenance and Upkeep
13
Dec 19, 2014 06:23 PM
redmom605
Drivetrain (Excluding Engine)
8
Aug 4, 2014 06:55 AM
c2vette
HHR SS
1
Feb 10, 2009 08:14 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:05 AM.