Chevy HHR Network
Fit and finish seem a touch off, now that could be the installer’s lack of experience
Fit and finish seem a touch off, now that could be the installer’s lack of experience
0 2021/09/06 16:32:14
See here how the skirt is not flush to the fender or the door
See here how the skirt is not flush to the fender or the door
0 2021/09/06 16:32:16
This timing chain slack triggered a P0014 code
This timing chain slack triggered a P0014 code
0 2021/09/07 15:12:30
Are you OEM skirts like these?
Are you OEM skirts like these?
0 2021/09/08 04:21:34
Or the running boards, with the black tread like these?
Or the running boards, with the black tread like these?
0 2021/09/08 04:21:36
Hand polished alloys
Hand polished alloys
0 2021/09/08 04:32:19
Factory gunmetal paint, chipped but not too bad
Factory gunmetal paint, chipped but not too bad
0 2021/09/08 04:32:23
Factory rims sand blasted and powdercoated
Factory rims sand blasted and powdercoated
0 2021/09/08 04:32:26
He or she listed the Kia Soul as their car, not an HHR. That’s what was was referring to , not if their rear window from that Soul blew out, it’s fine that they posted about it here.
He or she listed the Kia Soul as their car, not an HHR. That’s what was was referring to , not if their rear window from that Soul blew out, it’s fine that they posted about it here.
0 2021/09/08 13:58:39
The OEM 17 inch factory wheels
The OEM 17 inch factory wheels
0 2021/09/08 14:03:28
Aluminum chrome
Aluminum chrome
0 2021/09/09 04:11:43
It does have J56 and G85
It does have J56 and G85
0 2021/09/09 04:59:11
Like this, if it’s low in there the mount is toast!
Like this, if it’s low in there the mount is toast!
0 2021/09/12 04:49:58
0 2021/09/13 13:03:01
To polished aluminium alloys
To polished aluminium alloys
0 2021/09/13 13:03:08
From gun metal chrome
From gun metal chrome
0 2021/09/13 13:03:12
They look great with chrome wheels
They look great with chrome wheels
0 2021/09/13 15:55:09
They don’t stick out of my Cobalt SS rims and they stand up to lug nut socket, the coating stays black.
They don’t stick out of my Cobalt SS rims and they stand up to lug nut socket, the coating stays black.
0 2021/09/13 15:55:14
0 2021/09/14 04:42:26
0 2021/09/14 05:17:14
You see it here over the tie rod area of the steering knuckle pointing towards 1 to 2 o’clock
You see it here over the tie rod area of the steering knuckle pointing towards 1 to 2 o’clock
0 2021/09/14 05:20:56
New link top fastener , lots of room
New link top fastener , lots of room
0 2021/09/14 09:28:30
Old Moog link 9.8 inch , see how the lower fasteners is above the LCA
Old Moog link 9.8 inch , see how the lower fasteners is above the LCA
0 2021/09/14 09:28:36
New 11.8 inch link clears the LCA , this is with the HGR jacked up on safety stands suspension relaxed
New 11.8 inch link clears the LCA , this is with the HGR jacked up on safety stands suspension relaxed
0 2021/09/14 09:28:41
Lots of clearance at the swaybar end with new link installed
Lots of clearance at the swaybar end with new link installed
0 2021/09/14 09:28:45
Here the tires are on and the HHR is down off the jack and compressing the suspension
Here the tires are on and the HHR is down off the jack and compressing the suspension
0 2021/09/14 09:28:49
Same here compressed suspension, note the swaybar end is above the LCA
Same here compressed suspension, note the swaybar end is above the LCA
0 2021/09/14 09:28:54
Clearance at the swaybar at the rear
Clearance at the swaybar at the rear
0 2021/09/14 09:28:59
And here between the swaybar and LCA , the black area lower left of the photo
And here between the swaybar and LCA , the black area lower left of the photo
0 2021/09/14 09:29:03
0 2021/09/14 09:40:17
0 2021/09/15 17:05:05
Bottom of link is above the LCA and parallel to it
Bottom of link is above the LCA and parallel to it
0 2021/09/16 14:44:15
1/4 inch clearance at the bar
1/4 inch clearance at the bar
0 2021/09/16 14:44:33
Lotsa room
Lotsa room
0 2021/09/16 14:44:57
My FE3 bar
My FE3 bar
0 2021/09/17 08:29:31
An SS FE5swaybar
An SS FE5swaybar
0 2021/09/17 08:29:34
See how it is bent back towards the knuckle
See how it is bent back towards the knuckle
0 2021/09/17 13:05:12
Not flat like this , just bend it
Not flat like this , just bend it
0 2021/09/17 13:06:23
Part 2 in this photo
Part 2 in this photo
0 2021/09/19 13:27:12
I’ve installed Delphi TC5530 end links
I’ve installed Delphi TC5530 end links
0 2021/09/20 05:03:48