Chevy HHR Network
They fit and are not clunking at all. Yes the Moog K750012 links do have a grease zerk at each end
They fit and are not clunking at all. Yes the Moog K750012 links do have a grease zerk at each end
0 2021/09/20 05:03:56
0 2021/09/20 05:09:59
This mark on the aluminium lower control arm is from the vise , when I drilled out the ball joint rivets and pressed out the old rivets , or when I pressed out the rear bushing.
This mark on the aluminium lower control arm is from the vise , when I drilled out the ball joint rivets and pressed out the old rivets , or when I pressed out the rear bushing.
0 2021/09/20 07:10:43
For the top, it’s clear there’s lotsa room
For the top, it’s clear there’s lotsa room
0 2021/09/20 07:14:32
Up high from the rear
Up high from the rear
0 2021/09/20 07:14:37
This is the old 9.8 link
This is the old 9.8 link
0 2021/09/20 07:14:43
0 2021/09/21 12:14:08
I have these installed, they fit one way on the spindle , my ‘07 , these also came from the factory on my 2011.
I have these installed, they fit one way on the spindle , my ‘07 , these also came from the factory on my 2011.
0 2021/09/22 06:33:18
Thank you !
Thank you !
0 2021/09/22 06:44:47
0 2021/09/22 09:17:55
0 2021/09/26 13:41:24
0 2021/09/27 04:49:42
0 2021/09/27 05:00:22
This one has a brand new tire on it but a little curb rash to repair
This one has a brand new tire on it but a little curb rash to repair
0 2021/09/27 05:31:51
I got the 2LT rims cleaned up and mounted
I got the 2LT rims cleaned up and mounted
0 2021/09/27 05:31:57
The other 3 all are fairly good , just need a polish!
The other 3 all are fairly good , just need a polish!
0 2021/09/27 05:32:02
0 2021/09/27 07:44:00
0 2021/09/28 08:51:14
Different circuits in the cross over, not only for wires, but from different terminals as shown here in the 2009/2010 SS harness
Different circuits in the cross over, not only for wires, but from different terminals as shown here in the 2009/2010 SS harness
0 2021/09/28 16:34:03
This is a different circuit in the 2008 SS harness
This is a different circuit in the 2008 SS harness
0 2021/09/28 16:34:05
0 2021/09/28 16:40:47
2010 and 2011 should be this process
2010 and 2011 should be this process
0 2021/09/29 12:13:30
0 2021/09/29 12:13:33
0 2021/09/30 13:56:55
Hopefully you can see this screen shot
Hopefully you can see this screen shot
0 2021/10/03 06:16:59
The Red Ryder B-B gun was a fantasy gift for Ralphie in the movie A Christmas Story, which was filmed in St Catharines, Ontario.
The Red Ryder B-B gun was a fantasy gift for Ralphie in the movie A Christmas Story, which was filmed in St Catharines, Ontario.
0 2021/10/03 07:02:58
0 2021/10/03 07:07:04
Chromed
Chromed
0 2021/10/03 11:39:34
Black centre polished rim
Black centre polished rim
0 2021/10/03 11:39:35
Polished
Polished
0 2021/10/03 11:39:36
0 2021/10/04 16:04:23
0 2021/10/05 06:30:00
This would be a burnt fusible link
This would be a burnt fusible link
0 2021/10/05 09:49:23
This would be a broken terminal ring
This would be a broken terminal ring
0 2021/10/05 09:51:40
Not like this 2006 with large opening
Not like this 2006 with large opening
0 2021/10/06 05:07:59
But like this smaller opening
But like this smaller opening
0 2021/10/06 05:08:01
Definitely not like this where the patch has been damaged.
Definitely not like this where the patch has been damaged.
0 2021/10/06 05:08:02
It should be two red wires here ,
It should be two red wires here ,
0 2021/10/07 17:20:59
0 2021/10/08 13:37:30
OEM is a good choice
OEM is a good choice
0 2021/10/09 06:52:57