Chevy HHR Network
I can wrap it around my index and middle fingers, so you can wrap both lines at once
I can wrap it around my index and middle fingers, so you can wrap both lines at once
0 2022/07/28 12:28:19
The Velcro makes it easy to wrap the fuel lines
The Velcro makes it easy to wrap the fuel lines
0 2022/07/28 12:28:23
In there behind that grille
In there behind that grille
0 2022/07/28 14:57:27
0 2022/07/30 13:30:13
0 2022/07/30 13:30:15
1 2022/07/30 13:30:16
Driver’s side, just above the fastener , must have tightened it a tad to much.
Driver’s side, just above the fastener , must have tightened it a tad to much.
0 2022/08/01 10:45:57
This one’s on the driver’s side at the curve on the end, must be grit got in between the bar and hatch
This one’s on the driver’s side at the curve on the end, must be grit got in between the bar and hatch
0 2022/08/01 10:46:05
This is the passenger side also above the fastener.
This is the passenger side also above the fastener.
0 2022/08/01 10:46:11
Do not manually move the throttle plate! The plastic gears strip real easy!
Do not manually move the throttle plate! The plastic gears strip real easy!
0 2022/08/01 14:41:26
If it looks anything like this^^^^ we’ll know it’s not the ECT sensor
If it looks anything like this^^^^ we’ll know it’s not the ECT sensor
0 2022/08/02 04:58:04
0 2022/08/02 06:50:26
0 2022/08/02 06:51:23
0 2022/08/02 06:52:05
The driver’s side chip on the end
The driver’s side chip on the end
0 2022/08/02 06:54:41
Driver’s side by the fastener hole
Driver’s side by the fastener hole
0 2022/08/02 06:54:47
Similar over here on the passenger side fastener hole
Similar over here on the passenger side fastener hole
0 2022/08/02 06:54:53
Driver’s side end
Driver’s side end
0 2022/08/02 07:02:57
Passenger side above the fastener hole
Passenger side above the fastener hole
0 2022/08/02 07:03:03
Driver’s side above the fastener hole
Driver’s side above the fastener hole
0 2022/08/02 07:03:09
Took about ten minutes, no cutting the OEM harness
Took about ten minutes, no cutting the OEM harness
0 2022/08/02 11:01:14
0 2022/08/02 11:05:14
Rust encapsulator coated on, let cure for 24 hours
Rust encapsulator coated on, let cure for 24 hours
0 2022/08/02 11:05:20
Etching primer let cure 6 hours Still no rust has returned. I’m keeping a close eye on it. I agree if the rust has broken thru from the other side of the panel.
Etching primer let cure 6 hours Still no rust has returned. I’m keeping a close eye on it. I agree if the rust has broken thru from the other side of the panel.
0 2022/08/02 11:05:26
I see, not overnight, but Thursday August 4 9:30 am. The difference in price for the other brand could be because of shipping location possibly closer to your address
I see, not overnight, but Thursday August 4 9:30 am. The difference in price for the other brand could be because of shipping location possibly closer to your address
0 2022/08/02 13:55:00
The driver’s side bulb
The driver’s side bulb
0 2022/08/02 16:18:14
The access port to a fastener
The access port to a fastener
0 2022/08/02 16:18:20
The other side
The other side
0 2022/08/02 16:18:25
You can access the passenger side from inside the hatch
You can access the passenger side from inside the hatch
0 2022/08/02 16:18:29
The wiper motor blocks the driver’s side bulb
The wiper motor blocks the driver’s side bulb
0 2022/08/02 16:18:37
It’s not perfect, but neither is the rest of the car
It’s not perfect, but neither is the rest of the car
0 2022/08/02 16:22:30
The driver’s side end
The driver’s side end
0 2022/08/02 16:22:34
The passenger side .
The passenger side .
0 2022/08/02 16:22:38
This is the slave cylinder that line connects to this black plastic connector on the right
This is the slave cylinder that line connects to this black plastic connector on the right
0 2022/08/04 13:29:55
This is the clutch master cylinder the left side goes thru the firewall into the clutch pedal, the right side stays outside of the firewall , one line connects to the brake master cylinder reservoir, the end connects to the hose line that goes down to the clutch slave cylinder
This is the clutch master cylinder the left side goes thru the firewall into the clutch pedal, the right side stays outside of the firewall , one line connects to the brake master cylinder reservoir, the end connects to the hose line that goes down to the clutch slave cylinder
0 2022/08/04 13:29:59
Here is that hose or line , it connects the master cylinder to the slave cylinder to transfer hydraulic fluid , when you depress the clutch pedal , brake fluid is pushed to create hydraulic pressure to disengage the clutch
Here is that hose or line , it connects the master cylinder to the slave cylinder to transfer hydraulic fluid , when you depress the clutch pedal , brake fluid is pushed to create hydraulic pressure to disengage the clutch
0 2022/08/04 13:30:03
New powder coated valve cover, installed
New powder coated valve cover, installed
0 2022/08/05 13:21:20
The 16 year old 131-158 thermostat
The 16 year old 131-158 thermostat
0 2022/08/05 13:21:26
You can see some marks on the brass where it was sticking
You can see some marks on the brass where it was sticking
0 2022/08/05 13:21:31
A little closer look
A little closer look
0 2022/08/05 13:21:36