Chevy HHR Network
As we read here turn the crankshaft keyway to 3 o’clock to be able to turn the camshafts and not hit the valves
As we read here turn the crankshaft keyway to 3 o’clock to be able to turn the camshafts and not hit the valves
0 2022/10/25 15:34:23
These are the catalytic converters under your SS . I’m thinking someone’s going to cut them they aren’t taking them to a reputable place to sell them, so marking them would be a waste of your time.
These are the catalytic converters under your SS . I’m thinking someone’s going to cut them they aren’t taking them to a reputable place to sell them, so marking them would be a waste of your time.
0 2022/10/26 05:42:59
0 2022/10/26 09:00:59
This is my set up in Oldblue, I used the 10 mm / 3/8 inch hose that came with the can kit.
This is my set up in Oldblue, I used the 10 mm / 3/8 inch hose that came with the can kit.
0 2022/10/28 06:22:49
Another view, this was with my old K&N FIPK kit , for the stock air filter box use the other link as a guide to mounting the can
Another view, this was with my old K&N FIPK kit , for the stock air filter box use the other link as a guide to mounting the can
0 2022/10/28 06:22:51
0 2022/10/31 05:24:25
Enjoy a safe evening!
Enjoy a safe evening!
0 2022/10/31 14:36:53
0 2022/11/01 06:04:20
The car! I can’t post many photos
The car! I can’t post many photos
0 2022/11/01 06:57:00
0 2022/11/07 14:54:32
A screen to monitor different functions, not a tune device
A screen to monitor different functions, not a tune device
0 2022/11/08 05:06:07
The 25930725 arms are currently unavailable at RockAuto, disregard these part numbers, they do not fit your HHR
The 25930725 arms are currently unavailable at RockAuto, disregard these part numbers, they do not fit your HHR
0 2022/11/09 04:40:39
25930724 arms are in stock, for now!
25930724 arms are in stock, for now!
0 2022/11/09 04:40:43
You’ll need two of these
You’ll need two of these
0 2022/11/10 17:42:53
One of these
One of these
0 2022/11/10 17:42:56
0 2022/11/10 17:43:00
And one of these
And one of these
0 2022/11/10 17:44:47
Part number
Part number
0 2022/11/10 17:48:10
These Rotors have approximately 80,000 miles on them, getting crusty in the vanes
These Rotors have approximately 80,000 miles on them, getting crusty in the vanes
0 2022/11/12 10:17:44
See the rust scales , and the pads have another 45,000 miles , so they will get replaced also
See the rust scales , and the pads have another 45,000 miles , so they will get replaced also
0 2022/11/12 10:17:50
Brand new coated rotors to prevent rust , I torqued the caliper bracket bolts to 85 ft/lb and the caliper bolts to the sliders at 24 ft/lb . I made sure to pump the brake pedal several times to seat the pads to the rotors as I had retracted the caliper piston in so the new pads fit into the caliper.
Brand new coated rotors to prevent rust , I torqued the caliper bracket bolts to 85 ft/lb and the caliper bolts to the sliders at 24 ft/lb . I made sure to pump the brake pedal several times to seat the pads to the rotors as I had retracted the caliper piston in so the new pads fit into the caliper.
0 2022/11/12 10:17:57
And the chrome grille with the hot rod red bars ! I missed the original look I was going for !
And the chrome grille with the hot rod red bars ! I missed the original look I was going for !
0 2022/11/12 10:18:04
That thingy with the single mounting bolt. Get a real GM AC Delco replacement if you can blow air through yours. I’ve experienced early failures of after market cheap off shore , junk
That thingy with the single mounting bolt. Get a real GM AC Delco replacement if you can blow air through yours. I’ve experienced early failures of after market cheap off shore , junk
0 2022/11/14 13:05:56
0 2022/11/17 06:29:58
0 2022/11/17 09:55:59
0 2022/11/17 09:56:02
And the page regarding the DIC programming from the 2007 owners manual
And the page regarding the DIC programming from the 2007 owners manual
0 2022/11/19 11:38:38
0 2022/11/20 05:27:07
0 2022/11/20 05:27:13
So, they have pulled the plug on forum’s like ours.
So, they have pulled the plug on forum’s like ours.
0 2022/11/21 14:33:56
Superceeded to another number!
Superceeded to another number!
0 2022/11/22 05:41:02
The right side knuckle is discontinued!
The right side knuckle is discontinued!
0 2022/11/22 05:41:05
I used this type connector for my vapour line
I used this type connector for my vapour line
0 2022/11/22 08:25:19
Thi was to far to the solenoid, but you can see the white retainer clip
Thi was to far to the solenoid, but you can see the white retainer clip
0 2022/11/22 08:25:22
This piece I cut from a Cobalt at a parts yard, longer to move that connector back by the fire wall
This piece I cut from a Cobalt at a parts yard, longer to move that connector back by the fire wall
0 2022/11/22 08:25:23
See it over there on the right end of the pipe!
See it over there on the right end of the pipe!
0 2022/11/24 06:05:55
Enjoy a safe and happy Thanksgiving! From all of us here at chevyhhr.net and Internet Brands!
Enjoy a safe and happy Thanksgiving! From all of us here at chevyhhr.net and Internet Brands!
0 2022/11/24 06:44:31
0 2022/11/25 09:48:24
0 2022/11/26 12:37:47
0 2022/11/26 12:37:52