Are the 2.0 turbo engine throttle bodies different from the N/A tb's, I ask because I got a brand new one with the HHR SS I recently bought , an 08 5-spd , just wondering if its something I should hang on to , I measured it at 2 3/8 " which converts to approx. 60mm, thanks for any info .

 

According to the part numbers in the RockAuto website, the 2.0 is different then the 2.2, and tge 2.4 has a different part number. So , sell it as an SS part. Include the year of the SS and if it’s an automatic or 5 speed, to answer questions before they are asked.
And if you have the package it came in with the part number , include that information.

 

SS, the incoming air enters the throttle body from below. N/A, it enters from the top. I was surprised that they look(from photos) identical.

Do they interchange? I don't know. Maybe Hellsrotrod knows.

 

Apparently not, the part numbers indicate differences such as harness connector pins and throttle plate diameter.

 

Do yourself and your victim customer a favor and be sure about what it is before you sell it.

 

It came in the '08 HHR SS brand new, in a box of stuff I was just asking if it was 2.0 Turbo specific ,as in something I might want to hang on to, I wasn't asking about it in a resale sense.

 

Brand new, what is the part number?

 

Oldblue, I dont have the box, the only numbers on the throttle body are a with a bar code 467494 , I'm going to my storage before long and I'll see if the box is readable.