oneton

Yes the term. is a serviced part it is part of the tools for servicing & repair of the wire harness in all of the GM line!

cjuetten

I've been away for awhile and noticed the pictures are no longer valid. And my old PC died. The host server I used is no longer running. I finally got around to recovering the pictures off my old hard drive and was going to fix the pictures but I don't have edit access (might be because it several years old).

Moderator: If you can grant edit access to the orginal post or I could e-mail the pictures to you.

SindyDix

I am unable to change your editing privileges, only JonyyB can do that.
However: Upload the images to our gallery and I can make the changes for you.
When you upload them, keep the file name the same as they were and that will make the edits much easier for me to do.

cjuetten

I uploaded the pictures under /Members HHR's/cjuetten/ I found all but the first picture. If you have probelms or question let me know.

thanks

Don Juan

update of pics?

Don Juan

So any one who has done this mod or mess with the fuse box have any problems electrically after?????

I was just check it out and trying to see how to take it apart, now my rear wiper runs when the switch isn;t on(cant turn it off), the rear defrost is on (can't turn it off), my ac don't work(can't turn it on). My front wipers came on half way and then stoped my lights nd signals don't work. And when i mess with the switch for the rear wiper it kills the car and turns off.

Any one happen to know whats going on? I did not even connect anything or splice power from the fuse box.

Pretzel

Hello,
I ended up getting the entire fog light harness Used for $50.
It took about an hour to put in.
Very simple ...when removing old harness just follow in with the new one :)







Thanks members!!
Craig~

mars30

Just an FYI for everybody. Did the foglight install on my 08 LT1 panel and everything worked great. And I didn't have to do any reprogram of the BCM.
Thanks for the write-up.

MCT

Hello all,

I am picking up a very, very nice '08 red LT panel tonight, (actually I've been driving it), but have to finish the paperwork. Anyway, when you order the factory switch for this install, does it replace the complete insert, or how is it installed? Thanks in advance!

Marty

MCT

For those of you who are still interested in doing this install yourself I thought I would pass on information of where I got the OEM replacement fog lights.

I purchased these lights from Auto Accessories Warehouse:

http://stores.channeladvisor.com/aut...sorywarehouse/

The lights were $48.58 each with free shipping and handling. I had to call the company, though, as the free shipping was not showing up when I went through the checkout, but they took care of it immediately. Shipping took only a few days from California to the Midwest.

The lights are made by TYC, and are marked as OEM replacements for part number 15813308 and 15813307. They are very nice lights, fit perfect, and have the up and down adjuster.

Now all I have to do is get the BCM programmed for the lights and I am good to go.