How To Change 2008 2.2L Knock Sensor
#1
How To Change 2008 2.2L Knock Sensor
Like some other owners, I was getting sporadic "Knock Sensor Related" DTCs.
Bought a replacement from dealer ($36 w/CA Sales Tax - "same day special order").
Here is how I did the changeout. (Apologies beforehand for any picture quality issues - this is the first time I've posted with pix. In particular, #7 is quite fuzzy and the note on it is in pretty small type.)
TWO CAUTIONS:
(1) BE SURE TO CHECK FOR THE OLD BOLT RETAINING O-RING (see PIC #7 & 8)
(2) DISCONNECTING THE BATTERY IS *** AN ABSOLUTE MUST ** FOR THIS R&R!!!
FAILURE TO DO SO COULD RESULT IN EXPLOSION/FIRE AND/OR SERIOUS DAMAGE TO THE VEHICLE AND/OR TOOL BEING USED AND/OR SERIOUS BURNS TO YOUR BODY!!!
From personal experience, I saw the third degree burns a friend suffered when his nice stainless steel Seiko watch band shorted Battery Positive to Negative/Ground/Chassis.
NOT PLEASANT.
DISCONNECT THE BATTERY BEFORE STARTING THIS R&R.
The easiest place to remove the negative battery connection is at the battery back under the cargo area floor (10mm socket).
Bought a replacement from dealer ($36 w/CA Sales Tax - "same day special order").
Here is how I did the changeout. (Apologies beforehand for any picture quality issues - this is the first time I've posted with pix. In particular, #7 is quite fuzzy and the note on it is in pretty small type.)
TWO CAUTIONS:
(1) BE SURE TO CHECK FOR THE OLD BOLT RETAINING O-RING (see PIC #7 & 8)
(2) DISCONNECTING THE BATTERY IS *** AN ABSOLUTE MUST ** FOR THIS R&R!!!
FAILURE TO DO SO COULD RESULT IN EXPLOSION/FIRE AND/OR SERIOUS DAMAGE TO THE VEHICLE AND/OR TOOL BEING USED AND/OR SERIOUS BURNS TO YOUR BODY!!!
From personal experience, I saw the third degree burns a friend suffered when his nice stainless steel Seiko watch band shorted Battery Positive to Negative/Ground/Chassis.
NOT PLEASANT.
DISCONNECT THE BATTERY BEFORE STARTING THIS R&R.
The easiest place to remove the negative battery connection is at the battery back under the cargo area floor (10mm socket).
Thread
Thread Starter
Forum
Replies
Last Post
arclightzero
Problems/Service/Repairs
5
06-16-2010 12:20 PM