Good luck with the taillight bulbs.
08-14-2016, 03:11 PM
#21
New Member
Join Date: 08-14-2016
Location: United States
Posts: 10
If the housing is still usable, you have to pick the remains of the bulb out with whatever tool works for you. It most likely will come out in pieces.
If your problem is that the housing is melted such that the new bulb won't go in............ you need to get a new housing.
If your problem is that the housing is melted such that the new bulb won't go in............ you need to get a new housing.
I was able to get the blub out but it broke coming out. I can't push the new blub into place though
08-14-2016, 04:09 PM
#28
New Member
Join Date: 08-14-2016
Location: United States
Posts: 10
08-14-2016, 05:58 PM
#30
Moderator
Join Date: 05-01-2014
Location: California
Posts: 7,813
So you got into the cargo area, removed the access panel, rotated the bulb holder, removed the bulb/bulb holder assembly from the housing, then removed the bulb from the bulb holder. At some point the bulb broke, and you're not sure if you got all of the old bulb out of the bulb holder. Is all this correct so far?
So is the problem that
1. You cannot get the new bulb into the bulb holder? or
2. You cannot get the new bulb/bulb holder assembly into the housing?