Paint question. NEED ADVICE!!
Rest In Peace
Joined: 06-13-2010
Posts: 2,301
From: IL.
You send me a SASE, which is a Self Addressed Stamped Envelope, and I can send you back several in just about any color I have in stock.
This would be cut at about 2.5 inches Tall by about 10 inches Long.
I can cut it to just about any size, if someone has the original maybe they can measure it.
Figured youd be interested in Purple? This is just plain old "Impact" as the Font.
Nothing fancy, but Free.
I could even cut a solid backed Outline around the color Text like this as well. Possibilies are pretty much endless.
Thread Starter
Senior Member
Joined: 07-25-2012
Posts: 602
From: Columbus, Ohio
Very nice!! Well pm me ur address and id be glad to do so!!! I just didnt want to take advantage of your kindness is all lol why i offered $ im guessin you can solicit that on here. sorry lol
Rest In Peace
Joined: 06-13-2010
Posts: 2,301
From: IL.
Reply to my email sent, I'll cut these as soon as I hear from you. Loaded a roll of white on the plotter yesterday was just waiting to hear back from you before cutting, weeding and assembling the two colors on these into decals.
Thread Starter
Senior Member
Joined: 07-25-2012
Posts: 602
From: Columbus, Ohio
i never received it.. its n2o-as-in-oscar, not the number n2oracer@gmail.com and i think red would be sweet! gonna be easier to match color!
Rest In Peace
Joined: 06-13-2010
Posts: 2,301
From: IL.
There ya go.
In RED as you requested. ready to go as soon as your SASE arrives here.
The transfer film on top will need to be rubbed over with something like a credit card to Grab the Decal, be carful not to crease them.
Then just slowly peel the transfer film away from the backing the decal should lift off with the transfer film and you just place the decal wherever you want it.
Now again rub in place with credit card, New bondo spreader whatever you got to press the decal down good getting out any air bubbles.
Then pull the tranfer film off at an angle and keep it flat on the surface as you go, Watch for a corner or letter that starts to lift, if that happens roll the film back over and rub that area down again. Not the whole Decal just an area if it starts to lift as your pulling the film off.
Done, Nice Decal. Enjoy.
In RED as you requested. ready to go as soon as your SASE arrives here.
The transfer film on top will need to be rubbed over with something like a credit card to Grab the Decal, be carful not to crease them.
Then just slowly peel the transfer film away from the backing the decal should lift off with the transfer film and you just place the decal wherever you want it.
Now again rub in place with credit card, New bondo spreader whatever you got to press the decal down good getting out any air bubbles.
Then pull the tranfer film off at an angle and keep it flat on the surface as you go, Watch for a corner or letter that starts to lift, if that happens roll the film back over and rub that area down again. Not the whole Decal just an area if it starts to lift as your pulling the film off.
Done, Nice Decal. Enjoy.
