Chevy HHR Network
0 2021/08/12 09:37:57
0 2021/08/12 06:56:53
0 2021/08/12 06:54:21
0 2021/08/12 06:54:19
The air intake duct, commonly referred to as the woolly worm can be taped up, replaced with metal dryer vent flexible tubing . Part number Genuine GM 15865168 Air Intake Duct, Front be prepared for sticker shock they are expensive.
The air intake duct, commonly referred to as the woolly worm can be taped up, replaced with metal dryer vent flexible tubing . Part number Genuine GM 15865168 Air Intake Duct, Front be prepared for sticker shock they are expensive.
0 2021/08/12 05:15:03
The MAF is located here as Donbrew stated under the air cleaner box, it might not be plugged in
The MAF is located here as Donbrew stated under the air cleaner box, it might not be plugged in
0 2021/08/12 05:15:01
0 2021/08/09 11:01:30
The ground cable connects here , like that sticker says!
The ground cable connects here , like that sticker says!
0 2021/08/09 09:56:01
This one ! Under that red plastic hinged cover.
This one ! Under that red plastic hinged cover.
0 2021/08/09 09:53:28
We’ve hijacked this one enough! Savvy!
We’ve hijacked this one enough! Savvy!
0 2021/08/09 05:15:03
0 2021/08/09 05:10:37
Here’s a closer shot, it has a 21 mm head, a 7/8 will work. If that’s the bolt proper torque is 74 ft lbs then turn it another 180 degrees.
Here’s a closer shot, it has a 21 mm head, a 7/8 will work. If that’s the bolt proper torque is 74 ft lbs then turn it another 180 degrees.
0 2021/08/07 16:30:37
This bolt?
This bolt?
0 2021/08/07 16:30:35
0 2021/08/07 14:44:46
0 2021/08/07 11:12:28
That larger one in the starter solenoid
That larger one in the starter solenoid
0 2021/08/07 07:58:37
This one under the red safety cap
This one under the red safety cap
0 2021/08/07 07:57:48
0 2021/08/05 16:45:26
The new axles showed up as promised, today before 8 pm ! Thank you RockAuto, and FedEx! I ordered on Monday August 2 and they are delivered Thursday August 5 very great service!! They shipped from Syracuse NY
The new axles showed up as promised, today before 8 pm ! Thank you RockAuto, and FedEx! I ordered on Monday August 2 and they are delivered Thursday August 5 very great service!! They shipped from Syracuse NY
0 2021/08/05 16:32:45
These don’t show now on the RockAuto website, try again in a week or two
These don’t show now on the RockAuto website, try again in a week or two
0 2021/08/05 04:41:20
I’ve installed this kit, both fit and did not leak. I used a piece of 1 1/2 plumbing drain ABS and a coupler to drive in the seals to seat them.
I’ve installed this kit, both fit and did not leak. I used a piece of 1 1/2 plumbing drain ABS and a coupler to drive in the seals to seat them.
0 2021/08/04 17:12:36
I’ve installed this kit
I’ve installed this kit
0 2021/08/04 17:12:31
Yellow circle transmission mount bolt. Red arrow, transmission pan fluid leaking.
Yellow circle transmission mount bolt. Red arrow, transmission pan fluid leaking.
0 2021/08/02 09:28:01
Long oil pan bolt
Long oil pan bolt
0 2021/08/02 09:07:42
Here is the sensor, it lives behind the starter and solenoid there might not be enough room back there. I couldn’t find a photo online to confirm the space back in there
Here is the sensor, it lives behind the starter and solenoid there might not be enough room back there. I couldn’t find a photo online to confirm the space back in there
0 2021/08/01 10:53:35
0 2021/08/01 10:48:02
In your posted photo, it’s there just barely visible to the left of the knock sensor
In your posted photo, it’s there just barely visible to the left of the knock sensor
0 2021/08/01 06:41:47
Oil pressure sensor above the starter, I don’t believe this photo to be an LNF engine
Oil pressure sensor above the starter, I don’t believe this photo to be an LNF engine
0 2021/08/01 06:41:45
This gives a part number
This gives a part number
0 2021/07/31 09:20:54
Like this one from ZZP, but the you have a hole there for another gauge, or find an SS garnish with just one hole to mount a gauge
Like this one from ZZP, but the you have a hole there for another gauge, or find an SS garnish with just one hole to mount a gauge
0 2021/07/31 09:17:48
0 2021/07/31 04:18:20
0 2021/07/30 17:01:59
The part number depicts, for left side , but the springs should be the same for both sides.
The part number depicts, for left side , but the springs should be the same for both sides.
0 2021/07/30 04:53:04
The BlackSwan and Oldblue, sadly I sold the blue one! However it was enjoyed until a connecting rod broke and destroyed the engine!
The BlackSwan and Oldblue, sadly I sold the blue one! However it was enjoyed until a connecting rod broke and destroyed the engine!
0 2021/07/27 16:54:06
0 2021/07/27 13:20:21
Getting there! Not the Dodge !
Getting there! Not the Dodge !
0 2021/07/26 14:52:57
Here’s Oldblue with stock rims and same tires as the other photo
Here’s Oldblue with stock rims and same tires as the other photo
0 2021/07/25 16:05:27
0 2021/07/25 16:05:23
It doesn’t show here but the tires are further out to the fender openings, here on Oldblue, with the WV rally rims
It doesn’t show here but the tires are further out to the fender openings, here on Oldblue, with the WV rally rims
0 2021/07/25 16:05:21
The serpentine belt tensioner bolt should be like this in the middle of the slotted hole in the passenger side fender well.
The serpentine belt tensioner bolt should be like this in the middle of the slotted hole in the passenger side fender well.
0 2021/07/25 08:23:44