DIY IC pipe
04-05-2016, 06:56 PM
#11
Senior Member
Thread Starter
Join Date: 08-03-2010
Location: Lake Ronkonkoma, N.Y.
Posts: 3,564
Close to it. If the plastic shielding could be removed easier, then the rubber hose could be taken off at the IC to make the install SO much nicer.
It took me about 2 hours to do this job. And that bottom connection was the "kick in the head".
Getting ready to R&I the intake manifold to do the PCV oil catch can thing.
If nobody bothers me, with new gaskets and such, I should be able to do it in about 8 hrs.
I don't have my own garage to work on the HHR ,so I have to do it at work on weekends. Everything I do is a "Chinese fire drill".
Can't leave it because I don't have a second car either.
It took me about 2 hours to do this job. And that bottom connection was the "kick in the head".
Getting ready to R&I the intake manifold to do the PCV oil catch can thing.
If nobody bothers me, with new gaskets and such, I should be able to do it in about 8 hrs.
I don't have my own garage to work on the HHR ,so I have to do it at work on weekends. Everything I do is a "Chinese fire drill".
Can't leave it because I don't have a second car either.
Thread
Thread Starter
Forum
Replies
Last Post