GM Stage Kit Installed!!!
#71
Yes Mike I can. First off the instructions have left one point out that Bill informed me on. His quote: "Also, I did verify that we left out the statement that the sensor in the inlet tube needs to be trimed with a razer knife in the area that will interfere with the anti-rotation rib on the HHR (Solstice does not have this)." End quote. ......
Jared
Jared
Note: When Installing Power Upgrade Kit # 19212670 on the HHR SS the TMAP for the fresh air duct between the intercooler and the engine must be trimmed per the pictures below:
Last edited by HillsdaleHHR; 12-18-2008 at 03:28 PM. Reason: Reduced pic size
#73
Thanks for the clarification.
Last edited by ChevyMgr; 12-18-2008 at 03:08 PM. Reason: removed pic from quote
#76
What will happen if this piece is not trimmed? Maybe a dumb question, but mine is being installed right now as we speak and I don't want them to screw anything up.
Thanks,
SPPD
Last edited by HillsdaleHHR; 12-18-2008 at 03:52 PM. Reason: Fixed quote
#77
https://www.chevyhhr.net/forums/show...t=20042&page=5
Post #41 should help you with your ?
Hope that helps.. Turbotech is a GM tech and also a member here with the Auto SS....
Post #41 should help you with your ?
Hope that helps.. Turbotech is a GM tech and also a member here with the Auto SS....
#78
https://www.chevyhhr.net/forums/show...t=20042&page=5
Post #41 should help you with your ?
Hope that helps.. Turbotech is a GM tech and also a member here with the Auto SS....
Post #41 should help you with your ?
Hope that helps.. Turbotech is a GM tech and also a member here with the Auto SS....
Thanks everyone for the info.
SPPD
#80
On the way home from work tonight i decided to give it another try and see how much psi i can get. It was 26 degrees and the gause got up to 23psi. Im happy
Now i just wish it was dry outside because the pull i did was in 3rd because 2nd gets no traction
Now i just wish it was dry outside because the pull i did was in 3rd because 2nd gets no traction