I was think about just replacing the strut with the FE5 since i have to take the other ones off anyways. But it could only be 3 things i sprayed WD40 on the A frame bushing, sway bar bushing and the bottom of the strut wheir the coil sits and underneath the mount and the clunking stop for a while but then came back

 

Well how’s about spraying one place at a time now to narrow down the parts

According to these reviews the KYB’s are preferred for the FE5 SS

https://zzperformance.com/ecotec/kyb...-g-struts.html

 

Maybe the mounts are just bad but i didnt get them from zzp i Ordered mine off of summit i think mine are FE3 but i will Respray the swaybar bushing and the a frame bushings and will update later

 

I am having a similar issue in my '08. I just ordered the CABs from OTTP and I hope to do those along with the sway bar end links and bushings. Hopefully that will tighten up everything in the front end.

http://www.ottperformance.com/store/...&idcategory=41

 

Iginore most parts that claim to "fit all" if you have an SS.

 

You could have better weather protection and same performance out of these!


Front Lower Control Arm Bushing | Chevrolet Cavalier

The front pivot bushing rarely fails.

 

I would bet on the rear LCA bushing.

But, OP, KYB does not belong on an SS. They may fit, but "wallowing" is not in the SS' vocabulary. Reconsider.